Considerations
■It is recommended that you use only one automated answering option for incoming calls (either this feature, the Automated Attendant Service of the voice messaging system, or a PARTNER Attendant).
■Direct Extension Dial does not transfer calls to Calling Groups.
■This feature can handle three outside calls simultaneously.
■If you have lines programmed for Direct Extension Dial and Automatic System Answer, Direct Extension Dial answers the call first.
■A Direct Extension Dial button must be programmed on a button with lights on the system display phone at extension 10. (This feature will not work if it is programmed on a button without lights.)
Valid Entries
1 = Assigned
2 = Not Assigned ✔
3 = Select button (then press a programmable button to assign Direct Extension Dial to that button)
Programming
To assign or unassign a Direct Extension Dial button with lights at extension 10:
1.Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ # ] [ 1 ] [ 1 ] [ 3 ].
2.If you want to assign Direct Extension Dial to the first available button, press
[ Next Data ] until a display similar to the following appears:
DXD Button
1 Assigned - Ext10
If you want to unassign Direct Extension Dial, press [ Next Data ] until a display similar to the following appears:
DXD Button
2 Not Assigned
If you want to assign Direct Extension Dial to a specific button, press [ 3 ]. The display reads:
DXD Button
3 Select a Button
Then press a programmable button with lights to assign Direct Extension Dial to that button.
3.Select another procedure or exit programming mode.
4.Label the Direct Extension Dial button at extension 10.