Lucent Technologies 4.1 manual Pool Access Rstr

Programming

To restrict an extension from making or receiving calls on all the lines in a specific pool:

1.Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ # ] [ 3 ] [ 1 ] [ 5 ].

2.Enter the number of the extension to be programmed. For example, to

program extension 23, press [ 2 ] [ 3 ]. A display similar to the following appears:

Pool Access Rstr 23

Pool:

3.Enter the pool number (880, 881, 882, or 883) to be restricted at this extension. For example, to restrict pool 881, press [ 8 ] [ 8 ] [ 1 ]. The current restriction displays.

4.To change the pool restriction for this extension, press [ Next Data ] until the appropriate value displays—see “Valid Entries” on the previous page.

5.At this point:

■To restrict another pool at this extension, press [ Next Item ] or [ Prev Item ] until the pool number shows on the display. Then repeat Step 4.

■To restrict another extension, press [ Next Procedure ] [ Prev Procedure ] and begin at Step 2.

6.Select another procedure or exit programming mode.

Pool Access Restriction (#315) 5-153