Programming
To program a Night Service button at extension 10:
1.Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ # ] [ 5 ] [ 0 ] [ 3 ].
2.At this point:
■If you want to assign Night Service to the first available button, press [ Next Data ] until a display similar to the following appears:
Night Service Button
1Assigned - Ext10
■If you want to remove the Night Service button assignment, press [ Next data ] until a display similar to the following appears:
Night Service Button
2Not Assigned
■If you want to assign Night Service to a specific button, press [ 3 ]. A display similar to the following appears:
Night Service Button
3Select a Button
Then press a programmable button with lights to assign Night Service to that button.
3.Select another procedure or exit programming mode.
4.Label the Night Service button at extension 10.
Using
To turn Night Service on:
1.Press the Night Service button at extension 10.
■If a System Password is programmed, the green light next to the button flashes; you must continue with Step 2.
■If no System Password is programmed, the green light is on steady and Night Service is on.
2.Enter the password.
The green light is on steady. Night Service is on.
To turn Night Service off:
1.Press the Night Service button at extension 10.
■If a System Password is programmed, the green light next to the button flashes; you must continue with Step 2.
■If no System Password is programmed, the green light goes out and Night Service is off.
2.Enter the password.
The green light goes out. Night Service is off.
Night Service Button (#503)