Lucent Technologies 4.1 Using System Programming, Hospitality Features, Programming Overlays

Page 36

–Transfer Return Extension (#306) identifies the extension to which a call transferred by the voice messaging system should be routed if the destination extension does not answer and does not have voice mail coverage active. (The transfer return extension for the voice messaging system is typically extension 10.)

NOTE:

If an extension has VMS Cover and Call Coverage active, intercom and transferred calls and outside calls on lines assigned ownership ring at the covering extension after the specified number of Call Coverage Rings (#116). Then:

■If the covering extension does not answer, the call is routed after the specified number of VMS Cover Rings (#117) to the voice mailbox of the extension that activated Call Coverage.

■If the covering extension has Do Not Disturb active, the call is immediately routed to the voice mailbox of the extension that activated Call Coverage.

Hospitality Features

The following hospitality features are for special applications, such as the Bed and Breakfast and Hotel/Motel industries. With both features, the receptionist at extension 10 optionally can use the Intercom Autodialer to specify an extension.

■Outgoing Call Restriction Button (#114) lets you program a button on the phone at extension 10 to change an extension’s current Outgoing Call Restriction setting without entering System Programming mode. For example, after a guest’s departure, a hotel manager can change the No Restriction setting of the guest room phone to Inside Only so outside calls cannot be made from the phone after the guest checks out.

■Wake Up Service Button (#115) lets you program a button on the system phone at extension 10 to be used for scheduling wake-up or reminder calls for specified system extensions.

Using System Programming

System Programming changes settings for the system as a whole, or for individual lines, pools, or extensions. You can use System Programming to set up dialing restrictions, define groups, or set up auxiliary equipment. Refer to the filled-out System Planner when you are changing system settings, and be sure that any changes in programming are recorded there.

The Programming Overlays

System Programming requires a Programming Overlay placed over the dialpad of the system display phone at extension 10 or 11. (Overlays are provided with the system documentation. Replacements can be ordered from the Lucent Technologies GBCS Publications Fulfillment Center. See “Reference Materials” under “Product Ordering Information” in Appendix B.) Figure 2-3 on page 2-15 illustrates the Programming Overlays for the PARTNER-model phones.

2-14Programming

Page 35 Page 37
Image 36
Page 35 Page 37
Contents Partner Federal Communications Commission FCC Interference Notice Contents Specifications Maintenance, Repair, Ordering Information IN-1 Page How to Use This Guide PurposeTerminology Product Safety Statements How to Comment on This GuideOverview Important Safety Instructions Features and Capabilities System Components Primary Expansion CarrierOptional Devices Control Unit System ModulesSystem Mode System CapacityKey Mode Hybrid ModeFCC Registration Telephones System Telephones System PhonesIntercom Autodialers Standard TelephonesConnecting Standard Devices Auxiliary EquipmentRequirements Programming System Programming Options Overview Hardware Considerations Maximum LinesInitial System Setup Setting the System ClockAssigning Lines Key Extensions Pooled Extensions Customizing Extensions Changing Settings after Installation Copy SettingsChanging the System Clock Adding New Lines Key ExtensionsAdding New Pools Adding New ExtensionsSwapping Extensions Changing Settings to Support PBX or Centrex Services Recall SettingDialing Restrictions Speed Dial and Auto Dial NumbersRestricting Access to Outside Lines or Pools System Programming OptionsSpeed Dialing Dialing Restrictions and PermissionsControlling Calls on Outside Lines or Pools Overriding Dialing RestrictionsSummary Any callSetting Up Groups of Extensions Setting Up Auxiliary EquipmentPage Using System Programming Hospitality FeaturesProgramming Overlays PARTNER-34D PARTNER-18D Button Locations PARTNER-34D Phone PARTNER-18D/18 Phone PARTNER-6 Phone Programming Mode Telephone Programming Options Personal Speed Dialing Programming Telephone ButtonsBackup Answering Options Button ProgrammingPARTNER-34D Using Telephone Programming Using Centralized Telephone ProgrammingTelephone Models 24Programming Display Using Extension Programming Learning About Telephones System Telephones Buttons and Indicators MDC 9000/MDW HandsetMDC 9000 Base MDW 9000 Base Lights On nextRinging Patterns Ring Beep BeepUsing the Handset, Speaker, and Microphone Dial TonesHands-Free Answer on Intercom Hfai Voice Interrupt On Busy CallsStandard Telephones Speakerphone Performance TipsRing-ring-ring Using the Switchhook LimitationsFeature Phones Combination Extensions Using Telephones Basic Call Handling FeaturesDial-Code Features Using Auxiliary Equipment Night Service with Auxiliary Equipment Partner Attendant Overview Page If a Device Has Trouble Answering Machines Single Answering Machine To UseTo Program Multiple Answering Machines Extensions #505Personal Answering Machine Personal Answering MachineCall Reporting Devices Smdr ProgrammingCall Reports Date Time Number DUR Line STN Account TalkConsiderations Output Format Serial PrintersCall Accounting Devices Credit Card Scanners Credit Card ScannerUsing Fax Machines Fax Management Feature Using the Fax Management ButtonFax Machines Programming for Fax ManagementUsing the Fax Machine’s Notify Feature Transferring a Call to the Fax MachineSetting Up Fax Machines Restricting Dialing from a Fax MachineSingle Fax Machine Single Fax MachineFax Line Saver Setup Fax Line SaverSend and Receive Fax Machines To Program Fax 1 Send-ExtTo Program Fax 2 Receive-Ext. Y Modems Stand-Alone Modem for Placing Calls OnlySend and Receive Modem 10. Send and Receive ModemNight Service with Auxiliary Equipment 11. Night Service with Fax Machine and ModemAssign a Night Service Button #503 at extension Backup for Receptionist Partner AttendantTo Program Delayed Call Handling Voice Messaging Systems13. Delayed Call Handling Page Feature Reference 102 104 106 107 Iii Contents Programming Page Related Features AA Extensions #607Description Valid EntriesThis feature applies only to system phones Abbreviated Ringing #305This feature can be used only from a system phone Account Code Entry F12Using Following methods Allowed List Assignments #408 Allowed Phone Number Lists #407 Examples Toll Call Prefix requiredToll Call Prefix not required Toll Call Prefix required Toll Call Prefix not requiredAnswering Calls PickupVoice Interrupt On Busy #312 How to Answer Calls Ringing at Your Extension System Phone Call you are on is placed on holdYou are connected to the coverage call Standard PhoneAuto Dialing Auto Dial buttons can be programmed only on system phonesTo program an Auto Dial button Using Automatic Extension Privacy #304 Program extension 16, press 1 Automatic Line Selection Examples System Phone Automatic System Answer Button #111 Hold Disconnect Time #203ASA Button Assigned Ext10 Using Automatic System Answer Delay #110 Automatic System Answer Lines #204 Programming Automatic System Answer Mode #121 = Hold = Disconnect = Ring Automatic System Answer Delay #110 Mode #121Automatic System Answer Record/Playback ASA 1=Record Press 2 . a display similar to the following appears Automatic VMS Cover #310 To change the Automatic VMS Cover setting for an extension Background Music F19 Background Music F19 Call Coverage F20,XX,XX Considerations Using System Phone You hear intercom dial tone Call Coverage Rings #116 Valid Entries ProgrammingCall Forwarding/Call Follow-Me F11,XX,XX To program a Call Forwarding button To forward your calls Lift the handset Call Park Call is put on hold and you hear intercom dial tone Call Pickup This feature applies only to standard phones Call Waiting #316Caller ID InspectCalls Communications System Installation guide Caller ID Inspect F17 Press the programmed button to deactivate the feature Caller ID Name Display F16 Calling Group Extensions #502 Simultaneous PagingConference Calls You are connected with the first party First party is now on holdFirst party is now on hold. You hear intercom dial tone Conference Drop F06 Last-added outside party is dropped from the conferenceCopy Settings #399 Dial Mode #201 Direct Extension Dial Button #113 Direct Extension Dial Lines #205DXD Button Assigned Ext10 Using Direct Extension Dial Delay #112 Direct Extension Dial Lines #205 Programming Extension Dial Delay #112 Direct Extension Dial Record/Playback I892Press 2 . The following display appears Direct Line Pickup-Active Line I68LL Using System Phone Direct Line Pickup-Idle Line I8LL Disallowed List Assignments #405 Disallowed Phone Number Lists #404 Prevents local calls To save the telephone number in memory, you must press Enter Display Related Features Display Language #303 Considerations Valid EntriesDistinctive Ring #308 This feature is available only on system phones Do Not Disturb F01To program a Do Not Disturb button Doorphone Alert Extensions #606 Doorphone Extension #604 and #605 Emergency Phone Number List #406 Enter the telephone number Exclusive Hold F02 Extension Name Display LettersNumbers To assign a name to an extension This procedure applies only to standard phones External Hotline #311Lift the handset of the external hotline Fax Machine Extensions #601 Forced Account Code Entry #307 Valid Entries Forced Account Code List #409 Following entries are validFollowing entries are invalid To create a Forced Account Code List Account code in memoryGroup Call Distribution #206 Valid Entries Group Calling-Ring/Page I7G/I*7G All available extensions in the Calling Group ring To ring or page a Calling Group Lift the handset Group Hunting-Ring/Voice Signal I77G/I*77G To program a Hunt Group button 101 Group Pickup I66G ExampleTo use Group Pickup Lift the handset Hold HoldCall rings back You are reconnected to the held callHold Disconnect Time #203 Hotline #603 Internal Hotline Ext 33 Data Hunt Group Extensions #505 Group Call Distribution #206VMS Cover Considerations for Hunt Group Intercom Dial Tone #309 Joining Calls How to Join a Call System Phone Last Number Redial F05 Line Access Mode #313 Line Access Restriction #302 Current restriction displays Line Assignment #301 Emergency Phone Number List #406Line Assignment #301 Considerations 121 Line Coverage Extension #208 123 Line Ringing Immediate Ring-on steady Loudspeaker Paging Your voice is heard through the loudspeaker paging system Hybrid Mode Only Making CallsHow to Make an Outside Call System Phone How to Make an Intercom Call System Phone Manual Signaling F13XX or F13*XX Transferring CallsTo program a Manual Signaling button Message Light Off F10XX To turn off the message light Lift the handset Message Light On F09XX 137 Music On Hold #602 = Active = Not Active Night Service Button #503 Group Extensions #504Green light is on steady. Night Service is on Green light goes out. Night Service is offNight Service Group Extensions #504 Schedule #507Number of Lines #104 Outgoing Call Restriction #401 Line Pickup-Idle LineProgramming Outgoing Call Restriction Button #114 Outgoing Call Restriction Button #114 Outside Conference Denial #109 Personal Speed Dial Numbers To program Personal Speed Dial numbers Pickup Group Extensions #501 Pool Access Restriction #315 Pool Access Rstr Pool Extension Assignment #314 155 Pool Ext Assign 15 P881 Assigned Pool Line Assignment #207 Restriction #315Lines to Pools L08 2 Pool Privacy F07 Recall F03 Again Recall Timer Duration #107 Ring on Transfer #119 Rotary Dialing Timeout #108 Save Number Redial F04 Send All Calls Coverage Rings #116Cover Rings #117 Simultaneous Paging I*70 Standard Phone Smdr Output Format #610 Smdr Record Type #608 Smdr Talk Time #611 Smdr Top Of Page #609 System responds by printing the call report headerSpecial Dialing Functions Function Button Display Description174Special Dialing Functions Station Lock F21 On a programmed button with lights, the green light flashesYou hear intercom dial tone again This feature is available only at extension 10 or Station Unlock F22System Date #101 System Day #102 System Password #403 System Password does not appear on display phonesPassword is in effect until you hang up the phone System Reset-Programming Saved #728 System Speed Dial Numbers 5554757 Press # Dial the three-digit System Speed Dial code System Time #103 This time appears on system display phones as 215pToll Call Prefix #402 Touch-Tone Enable F08 Related ProceduresTransferring Calls How to Transfer a Call System Phone To transfer a call with one button touch Standard Phone Transfer Return Extension #306 193 Transfer Return Rings #105 VMS Cover F15 Line Coverage Extension #208To program a VMS Cover button VMS Cover Rings #117 VMS Hunt Delay #506 VMS Hunt Schedule #507 Voice Interrupt On Busy #312 Using Voice Interrupt On Busy Talk-Back F18 Voice Mailbox Transfer F14 Wake Up Service Button #115 Wake Up Service Button Assigned Ext10 Page Troubleshooting Problems with Auxiliary Equipment When You Need Help Power Failure OperationProblems with System Phones Possible Cause 4 Phone is faultySystem Phone Does Not Ring System Phone Does Not Work Display Shows Only 16 Characters Per Line Display is IncorrectDisplay Does Not Show Caller ID Name/Number Some Caller ID Information Does Not Display Intercom Autodialer Does Not Work ProperlyProblems with Standard Phones Standard Phone Does Not RingStandard Phone’s Message Waiting Light Does Not Light Other Problems with Phones Trouble Making Outside CallsTroubleshooting 10Troubleshooting Calls are Answered Automatically Using the Recall Feature Has No Effect Using the Recall Feature Disconnects CallTrouble Hearing Called Party Answer Problems with Combination Extensions Phone Does Not Work ProperlyProblems with Auxiliary Equipment Standard Device Does Not AnswerStandard Device Does Not Dial Out Properly Poor Transmission Quality on ModemSystem Problems Call Rings Continuously When Answered, No One At Other EndZeroes Print in Station or Duration Field on Smdr Printout Calls on Hold Are DisconnectedCall on Hold Hangs Up But Line Does Not Disconnect All Phones Dead No Dial Tone or LightsOther Problems with System Multiple Phones Dead No Dial Tone or LightsSpecifications 2Specifications Specifications A-3 Maintenance Repair InformationIn-Warranty Repairs Post-Warranty RepairsLimitation of Liability Partner Mail Voice Messaging System Installation and Use Product Ordering InformationReference Materials Hardware Components 6Maintenance System Telephones and Accessories FCC and IC Information FCC Notification and Repair InformationPage IC Notification Repair Information IC Certification No 3756A CSA Certification No. LR Load NoAvertissement Speed Dial Form Speed Dial FormPartner II Communications System Personal Speed Dial Numbers ExtensionProgramming Mixed Telephone Types 2Programming Mixed Telephone Types Programming Mixed Telephone Types Glossary GL-2Glossary Glossary GL-3 GL-4Glossary Glossary GL-5 GL-6Glossary Glossary GL-7 Index IN-2 Index Index IN-3 IN-4 Index Index IN-5 IN-6 Index Index IN-7 Centralized Telephone Programming Quick Reference Group Pickup System Programming Quick Reference For Centralized Telephone Programming, see previous pagesExtensions Dialing Restrictions and Permissions Groups Auxiliary Equipment Lucent Technologies Comcode Issue August
Related manuals
Manual 39 pages 54.53 Kb
Top Page Image Contents