Message Light On (F09XX)
Description
This feature turns on the message light at a specified extension (where XX is an extension number from
Related Features
■For instructions on turning off the message light, see Message Light Off.
■You may be able to use this feature to signal someone at a doorphone extension. See Doorphone Extension (#604 and #605).
Considerations
■This feature turns on the message light on system phones and standard phones that have message lights. (See “Standard Telephones” in Chapter 1 for a list of standard phones that have message lights.)
■For message waiting capability, standard phones with message waiting lights must be connected to an R3.1 or later 206 module and the system must be equipped with an R3.1 or later primary processor module.
■On a standard phone, the message light flashes (only when the phone is idle) to indicate that the extension has received a message.
■Do not use this feature for an extension that is covered by the voice messaging system. The voice messaging system automatically turns on the message light at a subscriber’s extension when a message is left in the mailbox.
■If you use this feature to signal someone at a doorphone extension, you must use Message Light Off to turn off the light.
■You can program a Message Light On button on a system phone to turn the message light on at a specific extension with one touch.
Programming
To program a Message Light On button:
1.Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ Central Tel Program ].
2.Enter the number of the extension to be programmed with this feature.
3.Press a programmable button.
4.Press [ Feature ] [ 0 ] [ 9 ].
5.Optionally, dial the
destination, or skip to Step 6 if you want only the feature code on the button.
6.Program another button for this extension or exit programming mode.