Kenwood TK-3300, TK-2300 instruction manual Preparation, Installing/ Removing the Battery Pack

Page 12

PREPARATION

Installing/ Removing the Battery Pack

◆Do not short the battery terminals or dispose of the battery by fire.

◆Never attempt to remove the casing from the battery pack.

1Align the battery pack with the

back of the transceiver, then press the battery pack and transceiver firmly together until the release latch on the base of the transceiver locks.

2 To remove the battery pack, lift the safety catch on the base of the transceiver, then press the release latch underneath the safety catch.

3 While pressing the release latch, pull the battery pack away from the transceiver.

Image 12

Contents TK-2300 Features Thank YouModels Covered by this Manual Operating Conditions Terminal DescriptionsFCC License Information One or more of the following statements may be applicable IiiPrecautions Page Information concerning the battery pack Do not disassemble or reconstruct batteryDo not jar or throw the battery ViiDo not touch a ruptured and leaking battery ViiiContents Installing/ Removing the Battery Pack PreparationInstalling the Antenna Installing the Belt ClipInstalling the Cover over the Speaker/ Microphone Jacks Installing the Optional Speaker/ Microphone or HeadsetInsert the speaker/ microphone Charging the Battery Pack LED indicator Power switch/ Volume controlPTT Push to Talk switch OrientationSide 1 key Side 2 keySpeaker/ microphone jacks Release the PTT switch to receive LED Indicator Status Indicator Color MeaningBasic Operations Rotate the Channel selector to select your Desired channelPress the PTT switch to save the setting Voice Operated Transmission VOXTime-Out Timer TOT Low Battery WarningBackground Operations Channel AnnouncementChannel Setup Mode TK-2300 K2 16 channel modelTK-3300 K 4 channel model Release the PTT switch and Side 1 key Channel Operating FrequenciesTK-2300 Operating TK-3300 Operating QT/ DQT Settings Press the Side 1 or Side 2 key to select QT or DQT setupQT Channel Settings DQT Channel Settings DQTChannel Confirmation Mode Release the PTT switchKEY Assignment Mode Table NumberPress the PTT switch to save the setting Programmable Functions Scan + Temporary Delete Side 2 key default ScanScrambler Squelch OffSuper Lock Side 1 key default Low Transmit PowerTroubleshooting Guide Problem SolutionALL Reset Mode Optional AccessoriesRelease the keys