Kenwood TK-3300, TK-2300 Background Operations, Time-Out Timer TOT, Low Battery Warning

Page 20

BACKGROUND OPERATIONS

Time-Out Timer (TOT)

The Time-out Timer prevent callers from using a channel for an extended duration (60 seconds). If you continuously transmit for the duration, transmission will stop and an alert tone will sound. To stop the tone, release the PTT switch.

Low Battery Warning

While operating the transceiver, the Low Battery Warning sounds an alert tone every 30 seconds and the LED indicator blinks red when the battery needs recharged or replaced.

Channel Announcement

When changing the channel, the transceiver will announce the newly selected channel number. Likewise, the transceiver will announce the current channel after you turn the transceiver power ON.

10

Image 20
Contents TK-2300 Models Covered by this Manual FeaturesThank You Operating Conditions Terminal DescriptionsFCC License Information One or more of the following statements may be applicable IiiPrecautions Page Information concerning the battery pack Do not disassemble or reconstruct batteryDo not jar or throw the battery ViiDo not touch a ruptured and leaking battery ViiiContents Installing/ Removing the Battery Pack PreparationInstalling the Antenna Installing the Belt ClipInsert the speaker/ microphone Installing the Cover over the Speaker/ Microphone JacksInstalling the Optional Speaker/ Microphone or Headset Charging the Battery Pack LED indicator Power switch/ Volume controlPTT Push to Talk switch OrientationSpeaker/ microphone jacks Side 1 keySide 2 key Release the PTT switch to receive LED Indicator Status Indicator Color MeaningBasic Operations Rotate the Channel selector to select your Desired channelPress the PTT switch to save the setting Voice Operated Transmission VOXTime-Out Timer TOT Low Battery WarningBackground Operations Channel AnnouncementChannel Setup Mode TK-2300 K2 16 channel modelTK-3300 K 4 channel model Release the PTT switch and Side 1 key Channel Operating FrequenciesTK-2300 Operating TK-3300 Operating QT/ DQT Settings Press the Side 1 or Side 2 key to select QT or DQT setupQT Channel Settings DQT Channel Settings DQTChannel Confirmation Mode Release the PTT switchKEY Assignment Mode Table NumberPress the PTT switch to save the setting Programmable Functions Scan + Temporary Delete Side 2 key default ScanScrambler Squelch OffSuper Lock Side 1 key default Low Transmit PowerTroubleshooting Guide Problem SolutionRelease the keys ALL Reset ModeOptional Accessories