Kenwood TK-2300, TK-3300 instruction manual Channel Confirmation Mode, Release the PTT switch

Page 29

CHANNEL CONFIRMATION MODE

To confirm your channel settings:

1With the transceiver power OFF, press and hold the PTT switch while turning the transceiver power ON.

•Continue to hold the PTT switch until the LED lights orange and the transceiver announces “Confirm”.

2Release the PTT switch.

•Transceiver announces the channel table number, tone number, scrambler and VOX settings of the selected channel.

3Rotate the Channel selector to your desired channel within 5 seconds, otherwise the operation will cancel.

•Transceiver announces the channel table number, tone number, scrambler and VOX settings of the selected channel.

Note: The transceiver will automatically return to normal operation if no action is performed for 5 seconds.

19

Image 29

Contents TK-2300 Models Covered by this Manual FeaturesThank You Terminal Descriptions Operating ConditionsFCC License Information Iii One or more of the following statements may be applicablePrecautions Page Do not disassemble or reconstruct battery Information concerning the battery packVii Do not jar or throw the batteryViii Do not touch a ruptured and leaking batteryContents Preparation Installing/ Removing the Battery PackInstalling the Belt Clip Installing the AntennaInsert the speaker/ microphone Installing the Cover over the Speaker/ Microphone JacksInstalling the Optional Speaker/ Microphone or Headset Charging the Battery Pack Power switch/ Volume control LED indicatorPTT Push to Talk switch OrientationSpeaker/ microphone jacks Side 1 keySide 2 key LED Indicator Status Indicator Color Meaning Release the PTT switch to receiveBasic Operations Rotate the Channel selector to select your Desired channelVoice Operated Transmission VOX Press the PTT switch to save the settingLow Battery Warning Time-Out Timer TOTBackground Operations Channel AnnouncementTK-2300 K2 16 channel model Channel Setup ModeTK-3300 K 4 channel model Channel Operating Frequencies Release the PTT switch and Side 1 keyTK-2300 Operating TK-3300 Operating Press the Side 1 or Side 2 key to select QT or DQT setup QT/ DQT SettingsQT Channel Settings DQT DQT Channel SettingsRelease the PTT switch Channel Confirmation ModeTable Number KEY Assignment ModePress the PTT switch to save the setting Programmable Functions Scan Scan + Temporary Delete Side 2 key defaultScrambler Squelch OffLow Transmit Power Super Lock Side 1 key defaultProblem Solution Troubleshooting GuideRelease the keys ALL Reset ModeOptional Accessories