BASIC OPERATIONS
1 Turn the Power switch/ Volume control clockwise to switch the transceiver power ON.
• A beep sounds.
2Rotate the Channel selector to select your
desired channel.
• When you receive an appropriate signal, you will hear audio from the speaker. Adjust the volume as necessary.
3To make a call, press and hold the PTT
switch, then speak into the microphone using your normal speaking voice.
• Hold the microphone approximately 1.5 inches (3 to 4 cm) from your lips.
4Release the PTT switch to receive.
Note: When the battery pack voltage becomes too low, the Low Battery Warning sounds an alert tone every 30 seconds and the LED indicator blinks red.
LED Indicator Status
Indicator Color | Meaning |
| ||||||||
Lights red | Transmitting |
| ||||||||
|
|
|
|
|
|
|
|
|
|
|
Lights green | Receiving a call |
| ||||||||
|
|
|
|
|
|
|
|
|
|
|
Blinks red | Battery power is low while transmitting |
| ||||||||
|
|
|
|
|
|
|
|
|
|
|
Blinks green | Scanning |
| ||||||||
|
|
|
|
|
|
|
|
|
|
|
Blinks red/orange | The selected channel has not been |
| ||||||||
programmed and cannot be used. |
| |||||||||
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|