Kenwood TK-3300, TK-2300 instruction manual ALL Reset Mode, Optional Accessories, Release the keys

Page 36

ALL RESET MODE

At some point in time, you may desire to reset the transceiver settings to their default values. This function will reset all channels to their default frequencies and QT/DQT, the VOX function to its default status, and all keys to their default functions.

To reset the transceiver:

1With the transceiver power OFF, press and hold the PTT switch, the Side 1 key, and the Side 2 key while turning the transceiver power ON.

Continue to hold the keys for 2 seconds, until the LED lights orange.

2Release the keys.

The keys must be released within 1 second after the LED lights orange, otherwise All Reset Mode will cancel.

The transceiver announces “Confirm” and returns to normal operation.

OPTIONAL ACCESSORIES

KMC-21 (Speaker/ microphone)

KMC-45 (Speaker/ microphone)

KHS-1 (Headset)

KHS-22 (Headset)

KNB-45L (Li-ion battery pack)

KSC-35 (Rapid charger)

KSC-356 (Multiple charger)

KBH-10 (Belt clip)

KWR-1 (Water resistant bag)

26

Image 36
Contents TK-2300 Features Thank YouModels Covered by this Manual Operating Conditions Terminal DescriptionsFCC License Information One or more of the following statements may be applicable IiiPrecautions Page Information concerning the battery pack Do not disassemble or reconstruct batteryDo not jar or throw the battery ViiDo not touch a ruptured and leaking battery ViiiContents Installing/ Removing the Battery Pack PreparationInstalling the Antenna Installing the Belt ClipInstalling the Cover over the Speaker/ Microphone Jacks Installing the Optional Speaker/ Microphone or HeadsetInsert the speaker/ microphone Charging the Battery Pack LED indicator Power switch/ Volume controlPTT Push to Talk switch OrientationSide 1 key Side 2 keySpeaker/ microphone jacks Release the PTT switch to receive LED Indicator Status Indicator Color MeaningBasic Operations Rotate the Channel selector to select your Desired channelPress the PTT switch to save the setting Voice Operated Transmission VOXTime-Out Timer TOT Low Battery WarningBackground Operations Channel AnnouncementChannel Setup Mode TK-2300 K2 16 channel modelTK-3300 K 4 channel model Release the PTT switch and Side 1 key Channel Operating FrequenciesTK-2300 Operating TK-3300 Operating QT/ DQT Settings Press the Side 1 or Side 2 key to select QT or DQT setupQT Channel Settings DQT Channel Settings DQTChannel Confirmation Mode Release the PTT switchKEY Assignment Mode Table NumberPress the PTT switch to save the setting Programmable Functions Scan + Temporary Delete Side 2 key default ScanScrambler Squelch OffSuper Lock Side 1 key default Low Transmit PowerTroubleshooting Guide Problem SolutionALL Reset Mode Optional AccessoriesRelease the keys