Kenwood TK-3300 QT/ DQT Settings, Press the Side 1 or Side 2 key to select QT or DQT setup

Page 26

QT/ DQT SETTINGS

Quiet Talk (QT) and Digital Quiet Talk (DQT) are functions that reject undesired signals on your channel. You will hear a call only when you receive a signal that contains a matching QT tone or DQT code. If a call containing a different tone or code is received, squelch will not open and you will not hear the call. Likewise, when transmitting using QT or DQT, the receiving station must have a matching tone or code to hear your call.

Be aware that other parties can still hear your calls if they set up their transceiver with the same tone or code.

To change the QT/DQT settings of a channel:

1With the transceiver power OFF, press and hold the PTT switch and Side 1 key while turning the transceiver power ON.

Continue to hold the PTT switch and Side 1 key until the LED lights orange and the transceiver announces “Self”.

2Release the PTT switch and Side 1 key.

The transceiver announces “Channel”.

Pressing the Side 1 key or Side 2 key will toggle between QT, DQT, and Channel setup.

3Press the Side 1 or Side 2 key to select QT or DQT setup.

The transceiver announces “QT” or “DQT”, depending on your selection.

4Press and release the PTT switch, then rotate the Channel selector to your desired channel.

Upon releasing the PTT switch, the transceiver announces “QT One” or “DQT One”, depending on your selection.

5Press the Side 1 or Side 2 key to increment/ decrement the Tone number, to select the new tone or code.

Tone numbers and their corresponding tones/ codes are provided in the table on pages 17 and 18.

Press and hold the Side 1 or Side 2 key to increment/ decrement the QT or DQT number by 5 at a time.

A voice announcement will inform you of the currently selected QT or DQT number.

16

Image 26
Contents TK-2300 Models Covered by this Manual FeaturesThank You Operating Conditions Terminal DescriptionsFCC License Information One or more of the following statements may be applicable IiiPrecautions Page Information concerning the battery pack Do not disassemble or reconstruct batteryDo not jar or throw the battery ViiDo not touch a ruptured and leaking battery ViiiContents Installing/ Removing the Battery Pack PreparationInstalling the Antenna Installing the Belt ClipInsert the speaker/ microphone Installing the Cover over the Speaker/ Microphone JacksInstalling the Optional Speaker/ Microphone or Headset Charging the Battery Pack PTT Push to Talk switch LED indicatorPower switch/ Volume control OrientationSpeaker/ microphone jacks Side 1 keySide 2 key Basic Operations Release the PTT switch to receiveLED Indicator Status Indicator Color Meaning Rotate the Channel selector to select your Desired channelPress the PTT switch to save the setting Voice Operated Transmission VOXBackground Operations Time-Out Timer TOTLow Battery Warning Channel AnnouncementChannel Setup Mode TK-2300 K2 16 channel modelTK-3300 K 4 channel model Release the PTT switch and Side 1 key Channel Operating FrequenciesTK-2300 Operating TK-3300 Operating QT/ DQT Settings Press the Side 1 or Side 2 key to select QT or DQT setupQT Channel Settings DQT Channel Settings DQTChannel Confirmation Mode Release the PTT switchKEY Assignment Mode Table NumberPress the PTT switch to save the setting Programmable Functions Scrambler Scan + Temporary Delete Side 2 key defaultScan Squelch OffSuper Lock Side 1 key default Low Transmit PowerTroubleshooting Guide Problem SolutionRelease the keys ALL Reset ModeOptional Accessories