Kenwood TK-3300, TK-2300 instruction manual Information concerning the battery pack

Page 8

Information concerning the battery pack:

The battery pack includes flammable objects such as organic solvent. Mishandling may cause the battery to rupture producing flames or extreme heat, deteriorate, or cause other forms of damage to the battery. Please observe the following prohibitive matters.

Do not disassemble or reconstruct battery!

The battery pack has a safety function and protection circuit to avoid danger. If they suffer serious damage, the battery may generate heat or smoke, rupture, or burst into flame.

Do not short-circuit the battery!

Do not join the + and – terminals using any form of metal (such as a paper clip or wire). Do not carry or store the battery pack in containers holding metal objects (such as wires, chain-necklace or hairpins). If the battery pack is short-circuited, excessive current will flow and the battery may generate heat or smoke, rupture, or burst into flame. It will also cause metal objects to heat up.

Do not incinerate or apply heat to the battery!

If the insulator is melted, the gas release vent or safety function is damaged, or the electrolyte is ignited, the battery may generate heat or smoke, rupture, or burst into flame.

Do not use or leave the battery near fire, stoves, or other heat generators (areas reaching over 80°C/ 176°F)!

If the polymer separator is melted due to high temperature, an internal short-circuit may occur in the individual cells and the battery may generate heat or smoke, rupture, or burst into flame.

Do not immerse the battery in water or get it wet by other means!

If the battery’s protection circuit is damaged, the battery may charge at extreme current (or voltage) and an abnormal chemical reaction may occur. The battery may generate heat or smoke, rupture, or burst into flame.

Do not charge the battery near fire or under direct sunlight!

If the battery’s protection circuit is damaged, the battery may charge at extreme current (or voltage) and an abnormal chemical reaction may occur. The battery may generate heat or smoke, rupture, or burst into flame.

vi

Image 8
Contents TK-2300 Models Covered by this Manual FeaturesThank You Operating Conditions Terminal DescriptionsFCC License Information One or more of the following statements may be applicable IiiPrecautions Page Information concerning the battery pack Do not disassemble or reconstruct batteryDo not jar or throw the battery ViiDo not touch a ruptured and leaking battery ViiiContents Installing/ Removing the Battery Pack PreparationInstalling the Antenna Installing the Belt ClipInsert the speaker/ microphone Installing the Cover over the Speaker/ Microphone JacksInstalling the Optional Speaker/ Microphone or Headset Charging the Battery Pack LED indicator Power switch/ Volume controlPTT Push to Talk switch OrientationSpeaker/ microphone jacks Side 1 keySide 2 key Release the PTT switch to receive LED Indicator Status Indicator Color MeaningBasic Operations Rotate the Channel selector to select your Desired channelPress the PTT switch to save the setting Voice Operated Transmission VOXTime-Out Timer TOT Low Battery WarningBackground Operations Channel AnnouncementChannel Setup Mode TK-2300 K2 16 channel modelTK-3300 K 4 channel model Release the PTT switch and Side 1 key Channel Operating FrequenciesTK-2300 Operating TK-3300 Operating QT/ DQT Settings Press the Side 1 or Side 2 key to select QT or DQT setupQT Channel Settings DQT Channel Settings DQTChannel Confirmation Mode Release the PTT switchKEY Assignment Mode Table NumberPress the PTT switch to save the setting Programmable Functions Scan + Temporary Delete Side 2 key default ScanScrambler Squelch OffSuper Lock Side 1 key default Low Transmit PowerTroubleshooting Guide Problem SolutionRelease the keys ALL Reset ModeOptional Accessories