Kenwood TK-2300, TK-3300 Press the PTT switch to save the setting, QT Channel Settings

Page 27

6Press the PTT switch to save the setting.

•A beep will sound.

•Repeat steps 3 to 6 to set up another channel.

7Turn the transceiver power OFF and then ON again to activate the new settings.

Note: The transceiver will automatically return to normal operation if no action is performed for 5 seconds.

QT Channel Settings:

QT	QT	QT	QT	QT	QT
Number	Frequency	Number	Frequency	Number	Frequency

1	67.0 Hz	15	110.9 Hz	29	179.9 Hz
2	71.9 Hz	16	114.8 Hz	30	186.2 Hz
3	74.4 Hz	17	118.8 Hz	31	192.8 Hz
4	77.0 Hz	18	123.0 Hz	32	203.5 Hz
5	79.7 Hz	19	127.3 Hz	33	210.7 Hz
6	82.5 Hz	20	131.8 Hz	34	218.1 Hz
7	85.4 Hz	21	136.5 Hz	35	225.7 Hz
8	88.5 Hz	22	141.3 Hz	36	233.6 Hz
9	91.5 Hz	23	146.2 Hz	37	241.8 Hz
10	94.8 Hz	24	151.4 Hz	38	250.3 Hz
11	97.4 Hz	25	156.7 Hz	39	69.3 Hz
12	100.0 Hz	26	162.2 Hz	off	OFF
13	103.5 Hz	27	167.9 Hz
14	107.2 Hz	28	173.8 Hz

17

Image 27

Contents TK-2300 Features Thank YouModels Covered by this Manual Terminal Descriptions Operating ConditionsFCC License Information Iii One or more of the following statements may be applicablePrecautions Page Do not disassemble or reconstruct battery Information concerning the battery packVii Do not jar or throw the batteryViii Do not touch a ruptured and leaking batteryContents Preparation Installing/ Removing the Battery PackInstalling the Belt Clip Installing the AntennaInstalling the Cover over the Speaker/ Microphone Jacks Installing the Optional Speaker/ Microphone or HeadsetInsert the speaker/ microphone Charging the Battery Pack Orientation LED indicatorPower switch/ Volume control PTT Push to Talk switchSide 1 key Side 2 keySpeaker/ microphone jacks Rotate the Channel selector to select your Desired channel Release the PTT switch to receiveLED Indicator Status Indicator Color Meaning Basic OperationsVoice Operated Transmission VOX Press the PTT switch to save the settingChannel Announcement Time-Out Timer TOTLow Battery Warning Background OperationsTK-2300 K2 16 channel model Channel Setup ModeTK-3300 K 4 channel model Channel Operating Frequencies Release the PTT switch and Side 1 keyTK-2300 Operating TK-3300 Operating Press the Side 1 or Side 2 key to select QT or DQT setup QT/ DQT SettingsQT Channel Settings DQT DQT Channel SettingsRelease the PTT switch Channel Confirmation ModeTable Number KEY Assignment ModePress the PTT switch to save the setting Programmable Functions Squelch Off Scan + Temporary Delete Side 2 key defaultScan ScramblerLow Transmit Power Super Lock Side 1 key defaultProblem Solution Troubleshooting GuideALL Reset Mode Optional AccessoriesRelease the keys