Kenwood TK-3300, TK-2300 instruction manual Precautions

Page 6

Notices to the User

◆Government law prohibits the operation of unlicensed radio transmitters within the territories under government control.

◆Illegal operation is punishable by fine and/or imprisonment.

◆Refer service to qualified technicians only.

Safety: It is important that the operator is aware of, and understands, hazards common to the operation of any transceiver.

Precautions

•Do not charge the transceiver and battery pack when they are wet.

•Ensure that there are no metallic items located between the transceiver and the battery pack.

•Do not use options not specified by Kenwood.

•If the die-cast chassis or other transceiver part is damaged, do not touch the damaged parts.

•If a headset or headphone is connected to the transceiver, reduce the transceiver volume. Pay attention to the volume level when turning the squelch off.

•Do not place the microphone cable around your neck while near machinery that may catch the cable.

•Do not place the transceiver on unstable surfaces.

•Ensure that the end of the antenna does not touch your eyes.

•When the transceiver is used for transmission for many hours, the radiator and chassis will become hot. Do not touch these locations when replacing the battery pack.

•Do not immerse the transceiver in water.

•Always switch the transceiver power off before installing optional accessories.

•The charger is the device that disconnects the unit from the AC mains line. The AC plug should be readily accessible.

iv

Image 6

Contents TK-2300 Features Thank YouModels Covered by this Manual Operating Conditions Terminal DescriptionsFCC License Information One or more of the following statements may be applicable IiiPrecautions Page Information concerning the battery pack Do not disassemble or reconstruct batteryDo not jar or throw the battery ViiDo not touch a ruptured and leaking battery ViiiContents Installing/ Removing the Battery Pack PreparationInstalling the Antenna Installing the Belt ClipInstalling the Cover over the Speaker/ Microphone Jacks Installing the Optional Speaker/ Microphone or HeadsetInsert the speaker/ microphone Charging the Battery Pack PTT Push to Talk switch LED indicatorPower switch/ Volume control OrientationSide 1 key Side 2 keySpeaker/ microphone jacks Basic Operations Release the PTT switch to receiveLED Indicator Status Indicator Color Meaning Rotate the Channel selector to select your Desired channelPress the PTT switch to save the setting Voice Operated Transmission VOXBackground Operations Time-Out Timer TOTLow Battery Warning Channel AnnouncementChannel Setup Mode TK-2300 K2 16 channel modelTK-3300 K 4 channel model Release the PTT switch and Side 1 key Channel Operating FrequenciesTK-2300 Operating TK-3300 Operating QT/ DQT Settings Press the Side 1 or Side 2 key to select QT or DQT setupQT Channel Settings DQT Channel Settings DQTChannel Confirmation Mode Release the PTT switchKEY Assignment Mode Table NumberPress the PTT switch to save the setting Programmable Functions Scrambler Scan + Temporary Delete Side 2 key defaultScan Squelch OffSuper Lock Side 1 key default Low Transmit PowerTroubleshooting Guide Problem SolutionALL Reset Mode Optional AccessoriesRelease the keys