Kenwood TK-3300, TK-2300 instruction manual Installing the Cover over the Speaker/ Microphone Jacks

Page 14

Installing the Cover over the Speaker/ Microphone Jacks

If you are not using a speaker/ microphone, install the cover over the speaker/ microphone jacks using the supplied M3 x 6 mm screw.

Note: To keep the transceiver water resistant, you must cover the speaker/ microphone jacks with the supplied cover.

Speaker/ microphone

jack cover

Installing the Optional Speaker/ Microphone (or Headset)

1Insert the speaker/ microphone

(or headset) plugs into the speaker/ microphone jacks.

2 Attach the locking bracket using the supplied M3 x 6 mm screw.

Note: The transceiver is not fully water resistant while using the speaker/ microphone.

Speaker/ microphone locking

bracket

Image 14

Contents TK-2300 Models Covered by this Manual FeaturesThank You Operating Conditions Terminal DescriptionsFCC License Information One or more of the following statements may be applicable IiiPrecautions Page Information concerning the battery pack Do not disassemble or reconstruct batteryDo not jar or throw the battery ViiDo not touch a ruptured and leaking battery ViiiContents Installing/ Removing the Battery Pack PreparationInstalling the Antenna Installing the Belt ClipInsert the speaker/ microphone Installing the Cover over the Speaker/ Microphone JacksInstalling the Optional Speaker/ Microphone or Headset Charging the Battery Pack PTT Push to Talk switch LED indicatorPower switch/ Volume control OrientationSpeaker/ microphone jacks Side 1 keySide 2 key Basic Operations Release the PTT switch to receiveLED Indicator Status Indicator Color Meaning Rotate the Channel selector to select your Desired channelPress the PTT switch to save the setting Voice Operated Transmission VOXBackground Operations Time-Out Timer TOTLow Battery Warning Channel AnnouncementChannel Setup Mode TK-2300 K2 16 channel modelTK-3300 K 4 channel model Release the PTT switch and Side 1 key Channel Operating FrequenciesTK-2300 Operating TK-3300 Operating QT/ DQT Settings Press the Side 1 or Side 2 key to select QT or DQT setupQT Channel Settings DQT Channel Settings DQTChannel Confirmation Mode Release the PTT switchKEY Assignment Mode Table NumberPress the PTT switch to save the setting Programmable Functions Scrambler Scan + Temporary Delete Side 2 key defaultScan Squelch OffSuper Lock Side 1 key default Low Transmit PowerTroubleshooting Guide Problem SolutionRelease the keys ALL Reset ModeOptional Accessories