Kenwood TK-2300, TK-3300 instruction manual Troubleshooting Guide, Problem Solution

Page 35

TROUBLESHOOTING GUIDE

	Problem	Solution

		• The battery pack may be dead.
		Recharge or replace the battery
	Cannot turn the	pack.
	transceiver power ON.	• The battery pack may not be
		installed correctly. Remove the
		battery pack and install again.

	Battery power dies shortly	• The battery pack life is finished.
	after charging.	Replace the battery pack with a
	after charging.	new one.
		new one.

		• Make sure you are using the
		same frequency and QT/DQT
		settings as the other members in
		your group.
	Cannot talk to or hear	• Other group members may be
	other members in your	using the Scrambler function. Turn
	group.	on your transceiver’s Scrambler.
		• Other group members may be
		too far away. Make sure you
		are within range of the other
		transceivers.

		• Change the QT/DQT settings.
	Other voices (besides	Make sure all group members
	group members’) are	change the settings on their
	present on the channel.	transceivers to match the new
		QT/DQT setting.

25

Image 35

Contents TK-2300 Models Covered by this Manual FeaturesThank You Terminal Descriptions Operating ConditionsFCC License Information Iii One or more of the following statements may be applicablePrecautions Page Do not disassemble or reconstruct battery Information concerning the battery packVii Do not jar or throw the batteryViii Do not touch a ruptured and leaking batteryContents Preparation Installing/ Removing the Battery PackInstalling the Belt Clip Installing the AntennaInsert the speaker/ microphone Installing the Cover over the Speaker/ Microphone JacksInstalling the Optional Speaker/ Microphone or Headset Charging the Battery Pack Orientation LED indicatorPower switch/ Volume control PTT Push to Talk switchSpeaker/ microphone jacks Side 1 keySide 2 key Rotate the Channel selector to select your Desired channel Release the PTT switch to receiveLED Indicator Status Indicator Color Meaning Basic OperationsVoice Operated Transmission VOX Press the PTT switch to save the settingChannel Announcement Time-Out Timer TOTLow Battery Warning Background OperationsTK-2300 K2 16 channel model Channel Setup ModeTK-3300 K 4 channel model Channel Operating Frequencies Release the PTT switch and Side 1 keyTK-2300 Operating TK-3300 Operating Press the Side 1 or Side 2 key to select QT or DQT setup QT/ DQT SettingsQT Channel Settings DQT DQT Channel SettingsRelease the PTT switch Channel Confirmation ModeTable Number KEY Assignment ModePress the PTT switch to save the setting Programmable Functions Squelch Off Scan + Temporary Delete Side 2 key defaultScan ScramblerLow Transmit Power Super Lock Side 1 key defaultProblem Solution Troubleshooting GuideRelease the keys ALL Reset ModeOptional Accessories