Kenwood TS-590S manual Starting and Stopping ARUA-10, Adjusting Volume

8 EXPANSIVE APPLICATION SOFTWARE

Figure 8-11 Device Tab

In the “Reception Output” of the Transceiver frame, “Microphone (USB Audio CODEC)” must be selected.

In the “Modulation Input” of the Transceiver frame, “Speaker (USB Audio CODEC)” must be selected.

In the “Microphone” of the PC frame, specify the microphone of the sound device. In the “Speakers” of the PC frame, specify the speaker of the sound device.

You can check the name of the sound device in the entry under “Sound video and game controllers” category in Windows Device Manager.

8.5.4 Starting and Stopping ARUA-10

To start ARUA-10, after above settings completes, right click the “ARUA-10” icon in the Windows task tray and select “Start” in the menu.

To stop ARUA-10, right click the “ARUA-10” icon in the Windows task tray and select “Stop” in the menu.

8.5.5 Adjusting Volume

To adjust volume of ARUA-10, right click the “ARUA-10” icon in the Windows task tray and select “Volume” in the menu and from the volume screen adjust volume.

For details, refer to “TS-590S USB Audio Setting Manual” on the Kenwood’s website.

8.5.6 Automatic Execution when Windows Starts

ARUA-10 is capable of starting automatically at the start of Windows. With this capability enabled, ARUA-10 starts and connection is made automatically upon restart of a PC.

To enable this capability, right click the “ARUA-10” icon in the Windows task tray and select “Other settings” in the menu, and the Setup dialog will appear. In the Other tab, click on the Run automatically at Windows startup checkbox.

62

CONTENTS

TS-590S