7 STRUCTURAL FEATURES
We have also paid much attention to the area and shape of the air inlets/outlets to lessen the operation noise of cooling fan motors.
To reduce the noise from the air inlets/outlets, the area and shape were examined through repeated experiments and we have finally succeeded in alleviating the cooling fan motors’ operating noise. The area of air inlets/outlets of the
The following figure portrays the aluminum
Figure 7-3 shows the side of the FINAL UNIT, Figure 7-4 shows the side of the TX-RX UNIT. Final FETs are positioned on the two raised areas located to the left on the side of the FINAL UNIT. On the reverse side of the final FETs, beneath the TX-RX UNIT, a heat sink (Figure 7-5) is placed to remove heat from the final FETs and discharge it.
Figure 7-3 On the Side of FINAL UNIT
Figure 7-4 On the Side of TX-RX UNIT
48
CONTENTS