Vertex Standard VX-177 manual Ani

Page 75

SET (MENU) MODE

 

 

SWITCH/KNOB SETTING

SET MODE ITEM

Enables/Disables the beeper.

6 [BEEP]

Selects the LCD/Keypad Lamp mode.

25

[LAMP]

Selects the Control Locking lockout combination.

26

[LOCK]

Selects the MONI switch function.

27 [M/T-CL]

Selects the function of the [HM/RV] key.

33

[REV/HM]

MISCELLANEOUS SETTING

SET MODE ITEM

Setting of the Automatic Power-Off feature.

1 [APO]

Enables/Disables the Busy Channel Lock-Out feature.

5 [BCLO]

Enables/Disables the BUSY LED while the Squelch is open.

8 [BSY.LED]

Shifting of the CPU clock frequency.

9 [CLK.SFT]

Indicates the DC Supply Voltage.

12

[DC VLT]

Enables/Disables the Band-edge beeper while selecting the

20

[EDG.BEP]

frequency via the DIAL knob.

 

 

Selects the alarm(s) utilized when the Emergency function

21

[EMG S]

is engaged.

 

 

Enables/disables the Password feature.

30

[PSWD]

Stores the password.

31

[PSWD W]

Adjusts the RF Squelch threshold level.

34

[RF SQL]

Selects the Smart Search Sweep mode.

38

[S SRCH]

Setting of the synthesizer steps.

45

[STEP]

Setting of the TOT time

47

[TOT]

Enables/Disables the TX LED while the radio is transmit-

48

[TX.LED]

ting.

 

 

Enables or disables “VFO Split” operation.

50

[VFO.SPL]

Select Wide (±5 kHz) or Narrow (±2.5 kHz) TX Deviation.

51

[WID.NAR]

Enables/Disables the Emergency Automatic ID (EAI) Fea-

52

[EAI]

ture.

 

 

PAGER SETTING (REQUIRES OPTIONAL FTD-7)

SET MODE ITEM

Enables/Disables the ANI function.

53

[ANI]

Program the ANI Identifier.

54 [ANI.WRT]

Enables/Disables the ANI function.

55

[PAGER]

Setting the Pager Code for the DTMF Pager.

56

[PAG.COD]

Enables/Disables the Answer Back function of the DTMF

57 [PAG.ABK]

Pager.

 

 

AVAILABLE VALUES (DEFAULT)

KEY+SC / KEY / OFF

KEY / 5SEC / TOGGLE

LK KEY / LKDIAL / LK K+D / LK PTT / LK P+K / LK P+D / LK ALL MONI / T-CALL

<REV> / <HOME>

AVAILABLE VALUES (DEFAULT)

OFF / 0.5H - 12.0 H BCL. ON / BCL.OFF LED. ON / LED.OFF SFT.OFF / SFT. ON

BEP.OFF / BEP. ON

EMG.BEP / EMG.LMP / EMG.B+L / EMG.CWT / EMG.C+B / EMG.C+L / EMG.ALL / OFF PWD.OFF / PWD. ON

S-1 / S-2 / S-3 / S-4 / S-5 / S-6 / S-8 / S-FULL / OFF SINGLE / CONT

5 / 10 /12.5 / 15 / 20 / 25 / 50 / 100 kHz, or AUTO 1MIN - 30MIN or OFF (6MIN) LED. ON / LED.OFF

SPL.OFF / SPL. ON

WIDE / NARROW

INT. 1M - INT.50M /

COM. 1M-COM.50M / OFF

AVAILABLE VALUES (DEFAULT)

ANI.OFF / ANI. ON

PAG.OFF / PAG. ON 000 - 999

ABK. OFF / ABK. ON

VX-177 OPERATING MANUAL

73

Image 75
Contents Yaesu Europe B.V Vertex StandardContents General Description Accessories & Options Supplied AccessoriesAvailable Options Controls & Connectors TOP & Front Panels Controls & Connectors LCD Controls & Connectors Side Panel PTT Push To Talk SwitchMoni Switch Press F + KEY Controls & Connectors Keypad FunctionsOne step or moves the memory Installation of Accessories Antenna InstallationInstallation of FNB-83 Battery Pack LOW Battery Indication Battery ChargingInstallation of FBA-25A Alkaline Battery Case Option Belt Clip InstallationInterface of Packet Tncs Switching Power on and OFF Adjusting the Audio Volume LevelOperation Tuning Dial Squelch AdjustmentFrequency Navigation Scanning Direct Keypad Frequency EntryTransmission Changing the Transmitter Power LevelKeyboard Locking Advanced OperationDisabling the Keypad Beeper KEYPAD/LCD IlluminationRF Squelch Checking the Battery VoltageRepeater Operation Repeater ShiftsAutomatic Repeater Shift ARS Manual Repeater Shift Activation Changing the Default Repeater ShiftsChecking the Repeater Uplink Input Frequency VFO Split ModeRepeater Operation Ctcss Operation CTCSS/DCS/EPCS OperationDCS Operation Tone Search Scanning Epcs Enhanced Paging & Code Squelch Storing the Ctcss Tone Pairs for Epcs OperationActivating the Enhanced Paging & Code Squelch System CTCSS/DCS/EPCS Bell OperationTone Calling 1750 HZ Split Tone OperationMemory Mode Storing Independent Transmit Frequencies Odd SplitsMemory Storage Home Channel Memory Memory RecallLabeling Memories Deleting Memories Memory Offset TuningMemory Bank Operation Assigning Memories to a Memory BankMemory Bank Recall Removing Memories from a Memory BankMoving Memory Data to the VFO Memory only ModeVX-177 Operating Manual Scanning Setting the Scan-Resume TechniqueManual VFO Scan Programmed VFO ScanVFO Scanning Memory Scanning How to Skip Omit a Channel during Memory Scan OperationPreferential Memory Scan Memory Bank Scan Programmable Band Limit Memory Scan PMS Priority Channel Scanning Dual Watch VFO PriorityMemory Channel Priority Home Channel PriorityVFO-VFO Dual Watch Priority Revert ModeBand Edge Beeper Automatic Lamp Illumination on Scan StopVX-177 Operating Manual Emergency Channel Operation Emergency FeatureEmergency Automatic ID EAI Feature Emergency Feature Setting the Smart Search Mode Smart Search OperationStoring Smart Search Memories Internet Connection Feature Internet Connection Feature Basic Arts Setup and Operation Arts Alert Beep Options Arts Polling Time OptionsCW Identifier Setup Dtmf Operation Manual Dtmf Tone GenerationDtmf Autodialer To send the telephone number Storing the 3-digit code for the Dtmf Pager Operation Dtmf Pager Operation Requires Optional FTD-7Activating the Dtmf Pager Storing the ANI code Activating the ANI featurePassword Miscellaneous SettingsChanging the Channel Steps Programming the KEY AssignmentsTX Battery Saver Receive Battery Saver SetupAutomatic POWER-OFF APO Feature Disabling the TX/BUSY IndicatorBusy Channel LOCK-OUT Bclo Transmitter TIME-OUT Timer TOTDCS Code Inversion Changing the TX Deviation Level Reset Procedures Try again CloningVX-177 Operating Manual ARS SET Menu ModeNET CTCSS/DSC/DTMF/EPCS Setting ANI Set Mode Item 4 ARS Set Mode Item 1 APOSet Mode Item 2 AR BEP Set Mode Item 3 AR INTSet Mode Item 11 CW WRT Set Mode Item 8 BSY.LEDSet Mode Item 9 CLK.SFT Set Mode Item 10 CwidSet Mode Item 20 EDG.BEP Set Mode Item 17 DT WRTSet Mode Item 18 ECS.CDR Set Mode Item 19 ECS.CDTSet Mode Item 25 Lamp Set Mode Item 22 I NETSet Mode Item 23 INT CD Set Mode Item 24 INT MRSet Mode Item 30 Pswd Set Mode Item 27 M/T-CLSet Mode Item 28 Name Set Mode Item 29 NM WRTSet Mode Item 36 PRI.RVT Set Mode Item 33 REV/HMSet Mode Item 34 RF SQL Set Mode Item 35 RPT.MODSet Mode Item 42 Skip Set Mode Item 39 SCN MDSet Mode Item 40 SCN.LMP Set Mode Item 41 ShiftSet Mode Item 47 TOT Set Mode Item 44 SQL.TYPSet Mode Item 45 Step Set Mode Item 46 TN FRQSet Mode Item 54 ANI.WRT Set Mode Item 51 WID.NARSet Mode Item 52 EAI Set Mode Item 53 ANIGeneral SpecificationsInstallation of the FTD-7 Dtmf Paging Unit Option Declaration by Manufacturer 0511X-0K