Icom IC-R5 instruction manual Copying memory contents

5 MEMORY CHANNELS

■Copying memory contents

This function transfers a memory channel’s contents to VFO (or another memory channel). This is useful when searching for signals around a memory channel frequency and for re- calling the offset frequency, subaudible tone frequency etc.

Pushing [V/M•S.MW•~] for 2 sec. at the step w, can

also be copied the memory contents to VFO. In this case, the steps e and r are not necessary.

DMemory➪VFO

qSelect the memory channel to be copied.

➥Push [V/M•S.MW•~] to select memory mode, then ro- tate [DIAL] to select the desired memory channel.

•Select the bank channel with [BAND•] and [DIAL], if de- sired.

wPush [V/M•S.MW•~] for 1 sec. to select select memory write condition.

•1 short and 1 long beep sound.

•“ ” indicator memory channel number blink.

DMemory➪memory

qSelect the memory channel to be transferred.

➥Push [V/M•S.MW•~] to select memory mode, then ro- tate the tuning dial to select the desired memory channel.

wPush [V/M•S.MW•~] for 1 sec. to select select memory write condition.

•1 short and 1 long beep sound.

•“ ” indicator memory channel number blink.

•Do not hold [V/M•S.MW•~] for more than 1 sec. otherwise the memory contents will be copied to VFO.

eRotate [DIAL] to select “VF.”	eRotate [DIAL] to select the target memory channel.
rPush [V/M•S.MW•~] for 1 sec. again.	rPush [V/M•S.MW•~] for 1 sec. again to transfer.

•VFO mode is selected automatically.

[EXAMPLE]: Copying channel 20 to 51.

Select memory channel
Push	for 1 sec.	Rotate	Push	for 1 sec.
FM DUP T SQL	FM	DUP T SQL		FM DUP T SQL	P SKIP

21