Icom IC-R5 instruction manual Memory Channels, General description

Page 27

MEMORY CHANNELS 5

■General description

The receiver has 1050 memory channels including 50 scan edge memory channels (25 pairs) for storage of often-used frequencies. And a total of 18 memory banks, A to H, J, L, N, O to R, T, U and Y are available for usage by group, etc. Up to 100 channels can be assigned into a bank.

DMemory channel contents

The following information can be programmed into memory channels:

•Operating frequency (p. 9)

•Receive mode (p. 12)

•Duplex direction (DUP or –DUP) with an offset frequency (p. 14)

•Tone squelch or DTCS squelch ON/OFF (p. 35)

•Tone squelch frequency or DTCS code with polarity (pgs. 36, 37)

•Scan skip information* (p. 30).

■Memory channel programming

qPush [V/M•S.MW•~] to select VFO mode. wSet the desired frequency:

➥Select the desired band with [BAND•].

➥Set the desired frequency with [DIAL].

➥Set other data (e.g. offset frequency, duplex direction, tone

squelch, etc.), if desired.

ePush [V/M•S.MW•~] for 1 sec. to select select memory write condition.

•1 short and 1 long beep sound.

•“ ” indicator memory channel number blink.

rRotate [DIAL] to select the desired channel.

•Scan edge channel, 00A/B to 24A/B can also be selected.

•While pushing [FUNC], rotate [DIAL] to selects memory channel in 10 channels steps.

tPush [V/M•S.MW•~] for 1 sec.

•3 beeps sound

•Memory channel number automatically increases when contin- uing to push [V/M•S.MW•~] after programming.

4

5

[EXAMPLE]: Programming 145.870 MHz into memory channel 20 (blank channel).

Push

for 1 sec.

Rotate

Push

for 1 sec.

FM

DUP T SQL

P SKIP

FM

FM

DUP T SQL

P SKIP

FM

DUP T SQL

P SKIP

16

Page 26 Page 28
Image 27
Page 26 Page 28
Contents IR5 Explicit Definitions Precaution Iii Supplied AccessoriesTable of Contents Belt clip Battery installationQuick Reference Guide PreparationInstall the Ni-Cd batteries Rotate Dial to select Y then push BandCharging confirmation is displayed as below About default setting Your first scanning ExperienceBasic operation Selecting a memory Channel Receive mode selectionSetting frequency Memory programmingSelecting a scan edge channel B Programmed scan operationProgramming scan edges Selecting a scan edge channel aStarting scan Starting scan Select VFO modeCancelling scan Selecting a scanning typeFront, top and side panels Panel DescriptionUCONTROL Dial Dial Push for 1 sec. to turn the receiver power on and OFFTTONE Indicators WLOCK Indicator pERECEIVE Mode Indicator p RDUPLEX Indicators pPriority Watch Indicator p 1SIGNAL Strength Indicator p2VOLUME Exchange Indicator p Charging caution Battery ChargingBattery installation Battery cautionCharging periods Approx hours Battery chargingCharging connections Charging descriptionFrequency and Channel Setting VFO and memory channelsOperating band selection Available frequency bands Frequency and Channel SettingRotate Dial to select the desired frequency band Setting a frequencySetting a tuning step Tuning step selectionRotate Dial to select the desired memory channel Push V/MS.MW~ to select the memory modeSelecting a memory channel Lock functionReceiving Setting audio volumeWhen a signal is received Basic OperationReceive mode selection Squelch level settingMonitor function Attenuator functionPush and hold SQL to monitor the operating frequency Setting Duplex operationRotate Dial to select DUP Setting dial select step Push Tsset momentarily to exit set modeDial select step General description Memory ChannelsMemory bank setting Rotate Dial to select the desired bank channel numberPush V/MS.MW~ momentarily to set the channel into the bank To return to regular memory condition, rotate Dial while Memory bank selectionPush V/MS.MW~ to select memory mode, if desired Rotate Dial to select the bank channelProgramming memory/bank name Rotate Dial to move the cursor to left or rightAvailable characters Selecting bank channel indication Selecting display typeCopying memory contents Essary Push V/MS.MW~ for 1 sec. to clear the contentsMemory clearing While pushing FUNC, push V/MS.MW~ for 1 secTransferring memory contents Erasing/transferring bank contents FREQUENCY/MEMORY Skip Function p Scan OperationScan types Full Scan pSelect VFO mode with V/MS.MW~ Full/band/programmed scanTo start the scan, push Modescan Example Programming 145.300 MHz into scan edges 03A Scan edges programmingMemory/bank/all bank scan Select memory mode with V/MS.MW~Clearing the stored frequencies Auto memory write scanDuring auto-memory write scanning Re-calling the stored frequenciesNel Skip channel/frequency settingScan pause timer Scan resume timerScan resume condition Watch starts Priority WatchPriority watch types About priority beep functionSelect memory mode, or the desired bank group then Push Tsset to exit set mode and start the watchPush Tsset to cancel the watch Priority watch operationVFO scan watch qSelect memory mode When scanning memory/bank channels0Push Tsset to cancel the watch and scan Step y Tone Squelch and Pocket BeepTone/DTCS squelch operation OPush Func to stop the beeps and blinking manuallyTone squelch frequency/DTCS code setting Available Dtcs code listAvailable tone frequency list Dtcs polarity setting While pushing FUNC, push Modescan to start the tone scan Tone scanGeneral SET ModeSet mode entering and operation Expanded set mode ON/OFFSet mode items General set mode itemsExpanded set mode items Beep output level Dial select stepPriority watch Key-touch beepPower save Antenna selectionMHz differ according to version, re Dial speed acceleration Monitor switch actionNo accessible switch is available, except Key lock effectScan stop beep Auto power OFFScan pause timer Scan resume timerOffset frequency Duplex directionTone squelch Available Dtcs code DTone frequency Ddtcs codeDtcs polarity Available subaudible tone frequenciesLCD contrast Weather alert functionTurns weather alert function on and OFF Other Functions Antenna selectionSelecting antenna Dial function assignment Weather channel operationWeather channel selection Turn the weather alert function OFF in set mode Push SQL on the master receiver Cloning between receiversAuto power-off function Cloning using a personal computerCloning error Partial reset Dccir channels Frequency TableTV channels DU.S.A. channelsChannels DChina channelsDNew ZealandFOT channels Indonesian channelsDItalian channels Taiwan channelsWeather channelsunit MHz VHF marine channelsOther communications in the USA Murs channelsHF CB Citizens Band channels Wireless Microphones General aviation frequenciesDCable TV IRC LPD Low Power Device channels Unit MHz Other communications- other countriesPMR446 channels unit MHz UHF C.R.S Citizen Radio Service channels Troubleshooting MaintenanceCP-18A/E fuse replacement Dgeneral SpecificationsOptions OptionsPocket Guide Memory channel programming We Icom Inc. Japan Declaration ConformityKamiminami, Hirano-ku, Osaka 547-0003 Japan
Top Page Image Contents