Marantz VP-12S3/VP-12S3L manual Initial Setting, Turning on the Power, Zooming and Focusing

Page 16

ENGLISH

INITIAL SETTING

Turning on the Power

1.Connect the supplied AC power cord. (☞ P.8)

2.Press the POWER ON button on the remote controller or the POWER button on the projector. The POWER ON indicator lights up.

STANDBY

POWER ON

PATTERN

PATT.

MENU V-MUTE

ENTER

Zooming and Focusing

Project an image on the screen roughly at first.

1.Turn the Zoom ring and adjust to the desired size within the zoom range.

2.Turn the Focus ring until the image on the screen

becomes clear.

2. 1.

Adjusting the Image Position

You can adjust the image position with the Lens Shift knob.

❖Turn the Lens Shift knob to clockwise : The image goes up.

Clockwise

Up

10

Image 16

Contents Model VP-12S3/VP-12S3L User Guide For the customers in the USA Important Safety Instructions Lamp Handing Precautions Precauciones para la manipulación de la lámpara Table of Contents Important Safeguards ReplacementEasy to install and operate FeaturesDesigned for silence and safety Accessories Lens Cap x Remote Controller xFront and Top View Projection Lens IR sensorRear and Terminals View TerminalsTerminals Bottom ViewRemote Controller InputRemote Controller Operational Range Preparing the Remote ControllerWhen making connections be sure to When pulling out a cableConnection with AC Power Supply ConnectionConnection with a HD-Video, Satellite, Cable Tuner or PC Advanced ConnectionInitial Setting Turning on the PowerZooming and Focusing Adjusting the Image PositionAdjusting the Height Detail FocusingReturning the Projector to its Initial Position Counterclockwise DownKeystone Correction Installation Recommended SettingInstalling on a tabletop Mounting on the ceiling16 9 Screen Screen Size and Projection Distance inch VP-12S3Screen Screen Size and Projection Distance m VP-12S3 Diagonal Width Height Minimum Maximum InchScreen Size and Projection Distance inch VP-12S3L 19 5/8 78 9/16 107 1/16Screen Size and Projection Distance mm VP-12S3L Minimum MaximumSelecting the Aspect Mode Selecting the Input Signal SourceBasic Operations Screen Images in a 169 screen Screen Images in a 43 screen To Turn off the Power Operations Menu StructurePicture Mode and Memory How to Operate MenusPicture mode Index Picture Adjust Color Temp. TemperatureSetting the Picture Adjust Menu ContrastDelay Fine MenuLuminance ChrominanceSub Control MiscellaneousSetting the Setting Menu Setting2-2 pull down for PAL Setting the System Menu SystemSetting the Display Menu DisplayConfiguration Auto Power OffReset Lamp Life OSD Position 169Setting the Config Menu Setting the Trigger 2 MenuTrigger On Output DC Off No outputPreset Setting the Preset MenuMemorizing settings in an index Gamma settingMaintenance Lamp Life and Replace LampLamp Life To clear the warning, p ss the Menu buttonInitialize the Lamp Life How to replace the Lamp UnitReplacing Lamp Unit English When installed on a tabletop Color Temperature AdjustmentWhen installed on a ceiling Color Temperature Sensor Protection Cleaning the LensReplacement Parts Optional AccessoriesTroubleshooting Error Mode On Screen MessageSpecifications Optical characteristicsAccessories Input/OutputTiming chart KHz ScanDimensions FrontBottom RearBlack Level Black setup GlossaryAspect ratio KeystoneIs a registered trademark