Marantz VP-12S3/VP-12S3L manual To Turn off the Power

Page 27

To Turn off the Power

1.Press the STANDBY button on the remote controller or the POWER button on the projector.

2.The fan continues running for about 1 minute to internally cool the projector. In the meantime, the POWER ON indicator on the projector flashes a blue color and buttons on the projector and remote control are irresponsive to touch. Once the fan stops, the POWER ON indicator goes out and the STANDBY indicator lights up a red color to indicate the projector is on standby.

Notice : Do not pull out the AC power cord until the projector turns in standby mode.

STANDBY

POWER ON

PATTERN

PATT.

MENU V-MUTE

ENTER

Notice :

-Do not pull out the power cord suddenly in the state of “POWER ON." It can cause a breakdown.

-When a WARNING indicator lit up or blinks in red, pull out the AC power cord after checking that the fan has stopped.

-The projector will not be turned on if the POWER ON button on the remote controller or the POWER button on the projector is pressed immediately after turning off. Press the POWER ON button on the remote controller or POWER button on the projector after the projector turns into standby mode.

-When on standby, power to the projector is not OFF completely. If not planning to use the projector for an extended period of time, unplug the AC power cord from AC power outlet as explained above.

ENGLISH

21

Image 27

Contents Model VP-12S3/VP-12S3L User Guide For the customers in the USA Important Safety Instructions Lamp Handing Precautions Precauciones para la manipulación de la lámpara Table of Contents Replacement Important SafeguardsFeatures Easy to install and operateDesigned for silence and safety Lens Cap x Remote Controller x AccessoriesProjection Lens IR sensor Front and Top ViewBottom View Rear and Terminals ViewTerminals TerminalsInput Remote ControllerPreparing the Remote Controller Remote Controller Operational RangeConnection When making connections be sure toWhen pulling out a cable Connection with AC Power SupplyAdvanced Connection Connection with a HD-Video, Satellite, Cable Tuner or PCAdjusting the Image Position Initial SettingTurning on the Power Zooming and FocusingCounterclockwise Down Adjusting the HeightDetail Focusing Returning the Projector to its Initial PositionKeystone Correction Mounting on the ceiling InstallationRecommended Setting Installing on a tabletopScreen Size and Projection Distance inch VP-12S3 16 9 ScreenScreen Diagonal Width Height Minimum Maximum Inch Screen Size and Projection Distance m VP-12S319 5/8 78 9/16 107 1/16 Screen Size and Projection Distance inch VP-12S3LMinimum Maximum Screen Size and Projection Distance mm VP-12S3LSelecting the Input Signal Source Selecting the Aspect ModeBasic Operations Screen Images in a 169 screen Screen Images in a 43 screen To Turn off the Power Menu Structure OperationsHow to Operate Menus Picture Mode and MemoryPicture mode Index Contrast Picture AdjustColor Temp. Temperature Setting the Picture Adjust MenuChrominance DelayFine Menu LuminanceMiscellaneous Sub ControlSetting Setting the Setting Menu2-2 pull down for PAL System Setting the System MenuDisplay Setting the Display MenuOSD Position 169 ConfigurationAuto Power Off Reset Lamp LifeOn Output DC Off No output Setting the Config MenuSetting the Trigger 2 Menu TriggerGamma setting PresetSetting the Preset Menu Memorizing settings in an indexTo clear the warning, p ss the Menu button MaintenanceLamp Life and Replace Lamp Lamp LifeHow to replace the Lamp Unit Initialize the Lamp LifeReplacing Lamp Unit English Color Temperature Adjustment When installed on a tabletopWhen installed on a ceiling Optional Accessories Color Temperature Sensor ProtectionCleaning the Lens Replacement PartsTroubleshooting On Screen Message Error ModeInput/Output SpecificationsOptical characteristics AccessoriesKHz Scan Timing chartRear DimensionsFront BottomKeystone Black Level Black setupGlossary Aspect ratioIs a registered trademark