Marantz VP-12S3/VP-12S3L manual Setting the Setting Menu, pull down for PAL

Page 33

Setting

The following settings can be made:

Menu		User A1
Picture Adjust	Lamp Mode	High
Setting	High Bright	Off
System	Aspect	Normal
Display	VCR Mode	Off
Config	Cinema	Auto
Trigger 2	Iris	F5.0
Preset	Black Setup	0 IRE

Lamp Mode	High, Low
High Bright	On, Off
	High Bright On : Display brightest image.
Aspect	Full, Normal, Zoom, Through
VCR Mode	On, Off
Cinema	Auto, Off
	Cinema mode : The 3-2 pull down for NTSC
	and the 2-2 pull down for PAL
Iris	F5.0, F3.0
	Sets the lens aperture.
	F5.0: Use to prioritize contrast.
	F3.0: Use to prioritize brightness.
Black Setup	0IRE, 7.5IRE /
	NORMAL, EXPAND (For DVI input)
	Black level adjustment, for adjusting black
	level by a video source.
VCR Mode

ON : A projector is forced into the intra-field only deinterlacing mode.

OFF : A projector is used with external field memories and operates in the full set of deinterlacing modes, i.e., motion adaptive video deinterlacing and full frame film source deinterlacing using 3:2 pulldown detection (2:2 pulldown for 625/50 sources).

❖Setting the Setting Menu

1.Select the desired menu item and press the 2 button. Setting items appears on the screen.

2.Press the 3 and 4 buttons to select a setting.

3.Press the 1 button to enter the setting and return to menu item selection.

MENU V-MUTE

2

ENTER2.

1, 3

INPUT

ASPECT

1, 3

ENGLISH

27

Image 33

Contents Model VP-12S3/VP-12S3L User Guide For the customers in the USA Important Safety Instructions Lamp Handing Precautions Precauciones para la manipulación de la lámpara Table of Contents Replacement Important SafeguardsFeatures Easy to install and operateDesigned for silence and safety Lens Cap x Remote Controller x AccessoriesProjection Lens IR sensor Front and Top ViewTerminals Rear and Terminals ViewTerminals Bottom ViewInput Remote ControllerPreparing the Remote Controller Remote Controller Operational RangeWhen pulling out a cable When making connections be sure toConnection with AC Power Supply ConnectionAdvanced Connection Connection with a HD-Video, Satellite, Cable Tuner or PCTurning on the Power Initial SettingZooming and Focusing Adjusting the Image PositionDetail Focusing Adjusting the HeightReturning the Projector to its Initial Position Counterclockwise DownKeystone Correction Recommended Setting InstallationInstalling on a tabletop Mounting on the ceilingScreen Size and Projection Distance inch VP-12S3 16 9 ScreenScreen Diagonal Width Height Minimum Maximum Inch Screen Size and Projection Distance m VP-12S319 5/8 78 9/16 107 1/16 Screen Size and Projection Distance inch VP-12S3LMinimum Maximum Screen Size and Projection Distance mm VP-12S3LSelecting the Input Signal Source Selecting the Aspect ModeBasic Operations Screen Images in a 169 screen Screen Images in a 43 screen To Turn off the Power Menu Structure OperationsHow to Operate Menus Picture Mode and MemoryPicture mode Index Color Temp. Temperature Picture AdjustSetting the Picture Adjust Menu ContrastFine Menu DelayLuminance ChrominanceMiscellaneous Sub ControlSetting Setting the Setting Menu2-2 pull down for PAL System Setting the System MenuDisplay Setting the Display MenuAuto Power Off ConfigurationReset Lamp Life OSD Position 169Setting the Trigger 2 Menu Setting the Config MenuTrigger On Output DC Off No outputSetting the Preset Menu PresetMemorizing settings in an index Gamma settingLamp Life and Replace Lamp MaintenanceLamp Life To clear the warning, p ss the Menu buttonHow to replace the Lamp Unit Initialize the Lamp LifeReplacing Lamp Unit English Color Temperature Adjustment When installed on a tabletopWhen installed on a ceiling Cleaning the Lens Color Temperature Sensor ProtectionReplacement Parts Optional AccessoriesTroubleshooting On Screen Message Error ModeOptical characteristics SpecificationsAccessories Input/OutputKHz Scan Timing chartFront DimensionsBottom RearGlossary Black Level Black setupAspect ratio KeystoneIs a registered trademark