Marantz VP-12S3/VP-12S3L manual Screen Images in a 169 screen

Page 25

The Screen Images in a 16:9 screen

Press the ZOOM button, the NORMAL button or the FULL button on the remote controller for the 4:3 aspect ratio video source.

Press the FULL button on the remote controller for 16:9 aspect ratio video source, such as 1080i, 1035i, and 720p video systems.

Press the FULL button on the remote controller for the squeezed video source.

See “Setting”. (P.27)

Original Source Image

 

16 : 9 video source

 

 

4 : 3 video source

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Full mode

The 16:9 squeezed image is displayed with the correct

The 4:3 image is enlarged horizontally.

aspect.

 

 

 

 

 

 

 

 

 

 

 

 

Normal mode

The picture in normal ratio 4:3 is displayed.

Zoom mode

The picture in normal ratio 4:3 is enlarged vertically and

 

 

horizontally (with same ratio) to the screen size

 

 

 

 

 

 

 

 

 

 

Through mode

It shows an image when the video source has the same resolution to RGB/video signal with 720 or less vertical pixel number.

ENGLISH

19

Image 25
Contents Model VP-12S3/VP-12S3L User Guide For the customers in the USA Important Safety Instructions Lamp Handing Precautions Precauciones para la manipulación de la lámpara Table of Contents Replacement Important SafeguardsEasy to install and operate FeaturesDesigned for silence and safety Lens Cap x Remote Controller x AccessoriesProjection Lens IR sensor Front and Top ViewTerminals Rear and Terminals ViewTerminals Bottom ViewInput Remote ControllerPreparing the Remote Controller Remote Controller Operational RangeWhen pulling out a cable When making connections be sure toConnection with AC Power Supply ConnectionAdvanced Connection Connection with a HD-Video, Satellite, Cable Tuner or PCTurning on the Power Initial SettingZooming and Focusing Adjusting the Image PositionDetail Focusing Adjusting the HeightReturning the Projector to its Initial Position Counterclockwise DownKeystone Correction Recommended Setting InstallationInstalling on a tabletop Mounting on the ceiling16 9 Screen Screen Size and Projection Distance inch VP-12S3Screen Diagonal Width Height Minimum Maximum Inch Screen Size and Projection Distance m VP-12S319 5/8 78 9/16 107 1/16 Screen Size and Projection Distance inch VP-12S3LMinimum Maximum Screen Size and Projection Distance mm VP-12S3LSelecting the Aspect Mode Selecting the Input Signal SourceBasic Operations Screen Images in a 169 screen Screen Images in a 43 screen To Turn off the Power Menu Structure OperationsPicture Mode and Memory How to Operate MenusPicture mode Index Color Temp. Temperature Picture AdjustSetting the Picture Adjust Menu ContrastFine Menu DelayLuminance ChrominanceMiscellaneous Sub ControlSetting the Setting Menu Setting2-2 pull down for PAL System Setting the System MenuDisplay Setting the Display MenuAuto Power Off ConfigurationReset Lamp Life OSD Position 169Setting the Trigger 2 Menu Setting the Config MenuTrigger On Output DC Off No outputSetting the Preset Menu PresetMemorizing settings in an index Gamma settingLamp Life and Replace Lamp MaintenanceLamp Life To clear the warning, p ss the Menu buttonInitialize the Lamp Life How to replace the Lamp UnitReplacing Lamp Unit English When installed on a tabletop Color Temperature AdjustmentWhen installed on a ceiling Cleaning the Lens Color Temperature Sensor ProtectionReplacement Parts Optional AccessoriesTroubleshooting On Screen Message Error ModeOptical characteristics SpecificationsAccessories Input/OutputKHz Scan Timing chartFront DimensionsBottom RearGlossary Black Level Black setupAspect ratio KeystoneIs a registered trademark