Marantz VP-12S3/VP-12S3L manual Screen Images in a 43 screen

Page 26

ENGLISH

The Screen Images in a 4:3 screen

Press the ZOOM button, the NORMAL button or the FULL button on the remote controller for the 4:3 aspect ratio video source.

Press the FULL button on the remote controller for 16:9 aspect ratio video source, such as 1080i, 1035i, and 720p video systems.

Press the FULL button on the remote controller for the squeezed video source.

See “Setting”. (P.27)

Original Source Image

 

16 : 9 video source

 

 

4 : 3 video source

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Full mode

The 16:9 squeezed image is displayed with the correct

The 4:3 image is enlarged horizontally.

aspect.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Normal mode

The picture in normal ratio 4:3 is displayed.

Zoom mode

The picture in normal ratio 4:3 is enlarged vertically and

 

 

horizontally (with same ratio) to the screen size

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Through mode

It shows an image when the video source has the same resolution to RGB/video signal with 720 or less vertical pixel number.

20

Image 26
Contents Model VP-12S3/VP-12S3L User Guide For the customers in the USA Important Safety Instructions Lamp Handing Precautions Precauciones para la manipulación de la lámpara Table of Contents Important Safeguards ReplacementDesigned for silence and safety FeaturesEasy to install and operate Accessories Lens Cap x Remote Controller xFront and Top View Projection Lens IR sensorTerminals Rear and Terminals ViewTerminals Bottom ViewRemote Controller InputRemote Controller Operational Range Preparing the Remote ControllerConnection with AC Power Supply When making connections be sure toWhen pulling out a cable ConnectionConnection with a HD-Video, Satellite, Cable Tuner or PC Advanced ConnectionZooming and Focusing Initial SettingTurning on the Power Adjusting the Image PositionReturning the Projector to its Initial Position Adjusting the HeightDetail Focusing Counterclockwise DownKeystone Correction Installing on a tabletop InstallationRecommended Setting Mounting on the ceilingScreen Screen Size and Projection Distance inch VP-12S316 9 Screen Screen Size and Projection Distance m VP-12S3 Diagonal Width Height Minimum Maximum InchScreen Size and Projection Distance inch VP-12S3L 19 5/8 78 9/16 107 1/16Screen Size and Projection Distance mm VP-12S3L Minimum MaximumBasic Operations Selecting the Input Signal SourceSelecting the Aspect Mode Screen Images in a 169 screen Screen Images in a 43 screen To Turn off the Power Operations Menu StructurePicture mode Index How to Operate MenusPicture Mode and Memory Setting the Picture Adjust Menu Picture AdjustColor Temp. Temperature ContrastLuminance DelayFine Menu ChrominanceSub Control Miscellaneous2-2 pull down for PAL SettingSetting the Setting Menu Setting the System Menu SystemSetting the Display Menu DisplayReset Lamp Life ConfigurationAuto Power Off OSD Position 169Trigger Setting the Config MenuSetting the Trigger 2 Menu On Output DC Off No outputMemorizing settings in an index PresetSetting the Preset Menu Gamma settingLamp Life MaintenanceLamp Life and Replace Lamp To clear the warning, p ss the Menu buttonReplacing Lamp Unit How to replace the Lamp UnitInitialize the Lamp Life English When installed on a ceiling Color Temperature AdjustmentWhen installed on a tabletop Replacement Parts Color Temperature Sensor ProtectionCleaning the Lens Optional AccessoriesTroubleshooting Error Mode On Screen MessageAccessories SpecificationsOptical characteristics Input/OutputTiming chart KHz ScanBottom DimensionsFront RearAspect ratio Black Level Black setupGlossary KeystoneIs a registered trademark