Marantz VP-12S3/VP-12S3L manual Setting the Preset Menu, Memorizing settings in an index

ENGLISH

Preset

The picture mode can also be selected from the MENU screen. This projector offers 6 picture modes: Theater, Standard, Dynamic, User A, User B and User C. Moreover, each of these picture modes has 3 indexes for memorizing picture quality adjustments.

•Theater : Reproduces the black suited for movie software.

•Standard : Suited for normal movie software.

•Dynamic : Suited for visually dynamic image software.

•User A,B,C: Enable the user to adjust the gamma curve as preferred.

Note : Each picture mode has 3 indexes (1, 2 and 3) and a default setting. When default is selected, “Picture Adjust” cannot be selected from the menu.

Menu		User A1
Picture Adjust	Mode	User A
Setting	Gamma	A
System	Index	1
Display
Config
Trigger 2
Preset

–Memorizing settings in an index

Select “Mode” from the above menu with the remote control, then select an image mode from Theater, Standard, Dynamic, and User A, B or C. Next, select the “Index” from the menu and set one value from “1” to “3”. Return to “Picture Adjust” in the main menu and adjust picture quality to your liking. The adjustment made here is automatically saved in memory.

–Gamma setting

Select “Mode” from the above menu with the remote control, then select User A, B or C as the picture mode.

When you do so, a gamma menu appears on the MENU screen. Select “Gamma” and the desired gamma curve (A, B, C, D, E, a, b, c).

A		a	B	b	C	c	D		E
	Theater							Dynamic
	Theater			Standard		Dynamic

You can also create your own gamma curve using special software. The created gamma curve can be stored in memory banks a, b or c. A memory bank that contains a stored gamma curve is indicated with an * mark in the MENU screen. When the projector is shipped from the factory, Theater is stored in memory bank a, Standard in memory bank b and Dynamic in memory bank c. (See above figure.)

❖Setting the Preset Menu

1.Select the desired menu item and press the 2 button. Setting items appears on the screen.

2.Press the 3 and 4 buttons to select a setting.

3.Press the 1 button to enter the setting and return to menu item selection.

2

1, 3

MENU V-MUTE

ENTER

INPUT ASPECT

2.

1, 3

32