Marantz VP-12S3/VP-12S3L Adjusting the Height, Returning the Projector to its Initial Position

Page 17

❖Turn the Lens Shift knob to counterclockwise : The image goes down.

Counterclockwise

Down

Adjusting the Height

You can position the projected image by changing the height of the projector’s adjusters.

1.Move the adjuster lever to the left or right to enable adjuster changing. Carefully lift the projector.

2.Once having positioned the projector, return the adjuster lever as before to lock in place. Check the adjusters are securely locked before releasing your hands from the projector.

3.Turn the adjuster to fine-adjust the height.

❖Returning the Projector to its Initial Position

Slightly lift the projector, turn the adjuster lever to the left or right, then carefully set the projector down.

Detail Focusing

You can strictly focus the image with focus pattern.

1.Press the PATTERN button to project the focus pattern on the screen.

STANDBY

POWER ON

PATTERN

PATT.

MENU V-MUTE

ENTER

ENGLISH

Image 17

Contents Model VP-12S3/VP-12S3L User Guide For the customers in the USA Important Safety Instructions Lamp Handing Precautions Precauciones para la manipulación de la lámpara Table of Contents Replacement Important SafeguardsDesigned for silence and safety FeaturesEasy to install and operate Lens Cap x Remote Controller x AccessoriesProjection Lens IR sensor Front and Top ViewTerminals Rear and Terminals ViewTerminals Bottom ViewInput Remote ControllerPreparing the Remote Controller Remote Controller Operational RangeWhen pulling out a cable When making connections be sure toConnection with AC Power Supply ConnectionAdvanced Connection Connection with a HD-Video, Satellite, Cable Tuner or PCTurning on the Power Initial SettingZooming and Focusing Adjusting the Image PositionDetail Focusing Adjusting the HeightReturning the Projector to its Initial Position Counterclockwise DownKeystone Correction Recommended Setting InstallationInstalling on a tabletop Mounting on the ceilingScreen Screen Size and Projection Distance inch VP-12S316 9 Screen Diagonal Width Height Minimum Maximum Inch Screen Size and Projection Distance m VP-12S319 5/8 78 9/16 107 1/16 Screen Size and Projection Distance inch VP-12S3LMinimum Maximum Screen Size and Projection Distance mm VP-12S3LBasic Operations Selecting the Input Signal SourceSelecting the Aspect Mode Screen Images in a 169 screen Screen Images in a 43 screen To Turn off the Power Menu Structure OperationsPicture mode Index How to Operate MenusPicture Mode and Memory Color Temp. Temperature Picture AdjustSetting the Picture Adjust Menu ContrastFine Menu DelayLuminance ChrominanceMiscellaneous Sub Control2-2 pull down for PAL SettingSetting the Setting Menu System Setting the System MenuDisplay Setting the Display MenuAuto Power Off ConfigurationReset Lamp Life OSD Position 169Setting the Trigger 2 Menu Setting the Config MenuTrigger On Output DC Off No outputSetting the Preset Menu PresetMemorizing settings in an index Gamma settingLamp Life and Replace Lamp MaintenanceLamp Life To clear the warning, p ss the Menu buttonReplacing Lamp Unit How to replace the Lamp UnitInitialize the Lamp Life English When installed on a ceiling Color Temperature AdjustmentWhen installed on a tabletop Cleaning the Lens Color Temperature Sensor ProtectionReplacement Parts Optional AccessoriesTroubleshooting On Screen Message Error ModeOptical characteristics SpecificationsAccessories Input/OutputKHz Scan Timing chartFront DimensionsBottom RearGlossary Black Level Black setupAspect ratio KeystoneIs a registered trademark