Lucent Technologies PA-8500 manual Checking RSN Inittab Settings

Chapter 5

/etc/inittab.

2.Enabling the rsntrans entry in /var/spool/cron/crontabs/rsn.

3.If any errors are encountered, no changes are committed.

Press return to continue or q to quit...

The script displays the RSN inittab settings and asks you if they are correct. The settings should be correct. Press y followed by the <Return> key to continue.

**************************************************

**************************************************

CHECKING RSN INITTAB SETTINGS

Changing settings to respawn

22,24c22,24

<rsnd:234:off:/usr/stratus/rsn/bin/rsndbs >/dev/null 2>&1

<rsng:234:off:/usr/stratus/rsn/bin/rsngetty -r >/dev/null 2>&1

<rsnm:234:off:/usr/stratus/rsn/bin/rsn_monitor >/dev/null 2>&1

---

> rsnd:234:respawn:/usr/stratus/rsn/bin/rsndbs >/dev/null 2>&1

> rsng:234:respawn:/usr/stratus/rsn/bin/rsngetty -r >/dev/null 2>&1 > rsnm:234:respawn:/usr/stratus/rsn/bin/rsn_monitor >/dev/null 2>&1

Are these the proper changes to be made (y/n): y

The script displays a commented-out line in the file /var/spool/cron/crontabs/sracs and asks you if this line should be uncommented. Press y followed by the <Return> key to continue.

**************************************************

**************************************************

CHECKING /var/spool/cron/crontabs/sracs FOR RSNTRANS

#1,16,31,46 * * * * /usr/stratus/rsn/bin/rsntrans -r1 -s HUB -z >/dev/null

Is this the proper line in /var/spool/cron/crontabs/sracs to uncomment? (y/n): y

If the script completes execution successfully, it displays the following messages.

RSNTRANS HAS BEEN ENABLED

/etc/inittab SETTINGS ARE COMMITTED

RSN IS NOW ON.

**************************************************

**************************************************

#

4.Execute the following script to make sure that you have connected to the hub.