Lucent Technologies PA-8500 manual Fault Codes

Appendix - Fault Isolation

Duplexing

device is in the process of duplexing. This transient status is displayed after the ftsmaint sync or ftsmaint enable command has been used on the CPU-Memory board.

Offline

Burning

PROM

Offline Standby

The device is not functional or not being used.

The ftsmaint burnprom command is in progress on the device. The suitcase stays in offline standby when burning PROM.

The status of a hardware component can change. For example, a component could go from Online to Offline because of a hardware or software error.

A.5 Fault Codes

The fault tolerant services return fault codes when certain events occur. Fault codes are displayed by the ftsmaint ls command in the FCode field and by the ftsmaint ls -lcommand in the Fault Code field. The following table lists and describes the fault codes.

Short Format	Long Format	Explanation
ls Format	ls -l Format

2FLT

ADROK

BLINK

BPPS

BRKOK

CABACU

CABADR

CABBFU

CABBRK

CABCDC

CABCEC

CABCFG

CABDCD

CABFAN

CABFLT

CABFLT

Both ACUs Faulted	Both ACUs are faulted.
Cabinet Address Frozen	The cabinet address is frozen.
Cabinet Fault Light Blinking	The cabinet fault light is blinking.
BP Power Supply	The BP power supply is either faulted or missing.
Faulted/Missing
Cabinet Circuit Breaker(s) OK	The cabinet circuit breaker(s) are OK.
ACU Card Faulted	The ACU card is faulted.
Cabinet Address Not Frozen	The cabinet addresses are not frozen.
Cabinet Battery Fuse Unit Fault	The cabinet battery fuse unit fault occurred.
Cabinet Circuit Breaker	A circuit breaker in the cabinet was tripped.
Tripped
Cabinet Data Collector Fault	The cabinet data collector faulted.
Central Equipment Cabinet	A fault was recorded on the main cabinet bus.
Fault
Cabinet Configuration	The cabinet contains an illegal configuration.
Incorrect
Cabinet DC Distribution Unit	A DC distribution unit faulted.
Fault
Broken Cabinet Fan	A cabinet fan failed.
Cabinet Fault Detected	A component in the cabinet faulted.
Cabinet Fault Light On	The cabinet fault light is on.