Siemens AS 488/TM manual Cabinet system, AS 488 S cabinet system

This catalog is out of date, see note on page 3

Cabinet system

AS 488 S

AS 488 S cabinet system

■Overview

The AS 488 S cabinet system is one of four design versions of the AS 488/TM automation system.

The AS 488 S is specially designed for migration or expansion of existing TELEPERM M systems, and therefore optimized for in- stallation in TELEPERM M cabinets with 19" packaging systems. The AS 488 S preassembled on an MIG I or MIG II migration rack is mounted on the front cabinet members of a TELEPERM M cabinet. The TELEPERM M installation guidelines are applicable with respect to the CE marking wherever TELEPERM M

I/O modules are operated in an AS 488 S. On the other hand, the SIMATIC S7/M7 guidelines apply to an AS 488 S exclusively operating with distributed I/Os on the PROFIBUS-DP.

In contrast to a system order in the form of individual compo- nents (the orderer is responsible for logistics and assembly), a completely equipped and pretested AS 488 S is ordered using a single Order No. specified by the selection of defined standards. The standards differ depending on whether TELEPERM M I/O modules are used (cabinet packaging system according to TELEPERM M guidelines) or not (cabinet packag- ing system according to SIMATIC guidelines), and vary with re- spect to the type of CPU (120 MHz or 75 MHz), the power supply (DC 24 V or AC 230 V) and the migration rack (MIG I or MIG II). In addition, supplementary components and parts – including any TELEPERM M cabinets required – can be ordered as indi- vidual options as previously.

Please order any TELEPERM M cabinets required using Catalog PLT 111. You can download this catalog from the Internet.

■Ordering Data

Order No.

Basic cabinet system
Versions 1AA to 4AA for installa-
tion in TELEPERM M 19" cabinets
according to TELEPERM M
guidelines and for operation with
TELEPERM M I/O modules
AS 488 S cabinet system
• DC 24 V power supply
• System software
• CPU 120 MHz
- Migration rack II	6DL2 141-1AA
- Migration rack I	6DL2 141-3AA
• CPU 75 MHz
- Migration rack II	6DL2 141-2AA
- Migration rack I	6DL2 141-4AA
Versions 4AA to 8AA for installa-
tion in TELEPERM M 19" cabi-
nets/racks according to SIMATIC
guidelines and for operation with
distributed I/Os on the PROFI-
BUS-DP (without TELEPERM M
I/O modules)
AS 488 S cabinet system

•Migration rack I

•PROFIBUS-DP interface

•SIMATIC 19" packaging system

•System software

•CPU 120 MHz

- AC 230 V power supply	6DL2 141-5AA
- DC 24 V power supply	6DL2 141-7AA
• CPU 75 MHz
- AC 230 V power supply	6DL2 141-6AA
- DC 24 V power supply	6DL2 141-8AA

Scope of delivery of AS 488 S systems

The complete Order Nos. defined above contain the following components:

Basic system

•SIMATIC M7 CPU 486-3 (CPU alternative 1)

CPU 486-3 with 75 MHz Pentium processor and 2 slots for in- terface modules; width: 2 standard slots

•SIMATIC M7 CPU 488-3 (CPU alternative 2)

CPU 488-3 with 120 MHz Pentium processor and 2 slots for in- terface modules; width: 2 standard slots

•Memory modules for CPU 486-3 or CPU 488-3, integrated, 2 x 8 Mbyte; 3.3 V

•Expansion and interface modules:

-1 x IF 961-DIO digital I/O module for I & C signalling functions

-1 x IF 962-COM serial interface module for commissioning terminal, with two RS 232 interfaces

Additional information is available in the Internet under:

www.siemens.com/teleperm

3/2 Siemens PLT 112 · 2002