Siemens AS 488/TM manual AS 488 in Simatic design, Introduction, Technical Specifications

Page 33

This catalog is out of date, see note on page 3

AS 488 in SIMATIC design

Introduction

AS 488/TM

■Overview

The AS 488 automation system comprises:

•CPU 486-3/488-3 with memory modules, memory card and in- terface modules for commissioning, diagnostics and I & C monitoring

•DC 24 V power supply (standard); a module for AC 120/230 V can be inserted as an option (the AC 120/230 V power supply is only possible if no TELEPERM M I/O modules are used)

•One or two EXM 478 extension modules (depending on system design and configuration) with IF 964-DP interface modules for connection of ET 200 distributed I/Os (one or two lines) and the PROFIBUS-TM system bus (PROFIBUS-TM and CS 275 local bus can only be connected as alternatives) and for the PLC/PLC coupling

•TPM 478 as additional option in conjunction with a further TBX 478 module, located between the DC 24 V power supply module and the CPU, for connection of up to seven I/O units with I/O modules of the TELEPERM M process control system

•As an alternative to the PROFIBUS-TM, the CS 275 system bus can also be connected via the TPM 478 module.

■Technical Specifications

System configuration

Basic system

SIMATIC M7-400 with

 

CPU 486-3 (75 MHz Pentium),

 

rack and AC or PC power supply

 

module

 

 

 

Extensions

IF 961-DIO, IF 962-COM,

 

IF 964-DP (max. 4), EXM 478

 

(max. 2), TPM 478 and TBX 478

 

interface modules

 

 

Option

CPU 488-3 as alternative

 

(120 MHz Pentium)

 

 

 

Power supply

 

 

 

 

 

Supply voltage

Current con-

Dissipated

 

sumption

power

 

 

 

AC 120/230 V, 10 or 20 A

0.8 to 2.5 A

45 to 60 VA

 

 

 

DC 24 V, 10 or 20 A

1.5 to 4.5 A

45 to 60 W

 

 

Backup battery for time/date

2 Li batteries type AA: 3.6 V,

 

1.9 Ah

 

 

 

 

Maintenance cycle

2 years

 

 

 

 

System data

 

 

 

 

 

TELEPERM M I/Os

 

 

 

 

 

• Function modules, arithmetic mod-

Yes

 

ules

 

 

 

 

 

• Signal modules

Yes

 

 

 

 

• Counter modules

Yes

 

 

 

 

• Coupling modules

Yes

 

 

 

 

• Max. number of TELEPERM M ex-

7

 

tension units

 

 

 

 

• Max. number of ES 100 K extension

Max. 1 in addition

systems

 

 

 

 

Distributed I/Os

Max. 2 x 122 units (stations)

 

 

Transfer data

Max. 122 byte in/out per station

 

 

 

ET 200M

 

 

 

 

• Function modules

Yes, e.g. counters, SIWAREX M

 

(option)

 

 

 

 

• Signal modules

Yes

 

 

 

 

• Counter modules

Yes

 

 

 

• Coupling modules

Yes, e.g. IM 157 (PROFIBUS-

 

PA), CP 340 (RS 232), CP 343-2

 

(AS-I), CP 342-5 (DP slave inter-

 

face)

 

 

 

 

ET 200S

 

 

• Function modules

Yes, e.g. counters

 

Required special drivers on

 

request 1)

• Signal modules

Yes

 

 

• Coupling modules

Yes

 

 

ET 200iS (available soon)

 

 

 

• Function modules

Yes, e.g. counters

 

Required special drivers on

 

request 1)

• Signal modules

Yes

 

 

• Coupling modules

Yes

 

 

ET 200X

 

 

 

• Signal modules

Yes

 

 

5/2

Siemens PLT 112 · 2002

Page 32 Page 34
Image 33
Page 32 Page 34
Contents Teleperm m Automation and Drives Related catalogsAS 488/TM automation systems Introduction AS 488/TMTeleperm M Process Control System Teleperm M Process Control System IntroductionOverview Automation systemsEngineering System busMigration strategy AS 488/TM Classification in the Teleperm M system environment HighlightsLimitations in communication Non-migratable systemsFunctions Highlights Area of applicationSystem properties System architectureSystem software CommissioningSystem architecture System propertiesFunctions AS 488/TM CPU Technical Specifications Quantity breakdownUser function blocks System softwareStandard function blocks Optional function blocksListing of Teleperm M standard function blocks Data blocks ConfigurationBlocks for analog and digital processing Blocks for binary processingPKF PKMAKS AKEType Name Function Interface Blocks for PLC/PLC coupling with PROFIBUS-AG/AGType Name Function For modules with Order No Blocks for I/O modules with standardized display Organization blocksTest blocks Commissioning terminal CommissioningCable for connection of the commissioning terminal If 962-COM serial interface moduleBus connection Engineering with Prograf AS+Technical Specifications Hardware requirements Software requirementsAutomation systems released for Prograf AS+/NT Accessories PC components ISA for connection to Teleperm M system busPC components PCI for connection to Teleperm M system bus System architecture AS 488 S cabinet system AS 488 S Cabinet systemAS 488 S Cabinet systemAS 488 S cabinet system Scope of delivery of AS 488 S systemsCables for connection of two I/O buses with versions 1 Power supplyConnection to CS 275 system bus with versions 5 to System softwareLog IK PI Teleperm M 19 cabinets6DS9 207-8AA AS 488 K compact system AS 488 K Compact systemAS 488 K Compact systemAS 488 K compact system Overview Ordering DataConnection to CS 275 system bus Teleperm M I/Os connectionBus components for single CS Bus components for redundant CSEach 6DS4 400-8AB 6DS9 203-8CA Introduction AS 488 in Simatic designTechnical Specifications AS 488 in Simatic designIntroduction Coupling to PROFIBUS-PA Coupling to other systems with DP interfaceET 200U ET 200BOverview CPU Central processing unitMonitoring CPUPower supply modules PS 405 and PS 407 load power suppliesBackup battery EXM 478 expansion module 6ES7 478-2AC00-0AC0 Connection of distributed I/OsIf 964-DP interface module DP2-INI initialization C79451-A3496-D900Connection to Teleperm M I/Os Connection to CS Connection to PROFIBUS-TM TPM 478 interface module 6ES7 478-2DA01-0AC0EXM 478 expansion module Packaging system Overview UR2 rackMigration rack System software, documentation Additional configuring toolsSimatic PCS 7 cabinet design Cabinet packaging system Simatic PCS 7 cabinet designMechanical design Basic cabinetElectrical design Options for the electrical designLoad power supply for I/O modules Power supplyET 200M I/O unit Hot swappingAS 488/TM system unit Simatic PCS 7 cabinet design Migration packages Migration of existing systemsMigration of existing systems Migration of existing systemsGeneral marginal conditions Additive supplementary components and services Scope of delivery and servicesMigration packages AS 488 S migration packageAS 488 S migration package General marginal conditions/limitationsAS 488 K migration package GWK-PAS-AS-UPAK488 AS 488 K migration packageMIG I migration rack MIG II migration rack Configuration possibilities for I/OsMIG K migration rack Retrofitting services Check list prior to retrofitting Configuring lists Migratable Teleperm M modules in AS 488/TMMigratable Teleperm M modules in AS 488/TM Explanations for the column „Release Explanations for the column „RemarksBinary calculation modules Coupling modulesMigration of existing systems Connecting PROFIBUS-PA to AS 488/TM Process I/OsET 200M packaging system Process I/Os TBX 478 interface module Connecting Teleperm M I/OsTBX 478 interface module 6ES7 478-2DX00-0AA0 Set of ribbon cables C79451-A3496-D2Connecting Simatic I/Os Interface module for connection to PROFIBUS-DPCommunication via the PROFIBUS-DP fieldbus PROFIBUS-DP quantity breakdown COM ProfibusMode of operation DP extensions for AS 488/TMDriver blocks ET 200M ET 200M packaging systemComponents for both packaging systems Simple packaging system with bus connectorsET 200M modules Temperature range Inputs, 14 bit, 20 ms conver Temperature range Inputs, 16 outputsSM 323 digital input/output modules Inputs, 8 outputs Inputs, 8 outputs, extendedEx digital input/output modules EEx ib Ex I/O modulesIntrinsically-safe equipment which can be connected Ex analog input/output modules EEx ibFunction and communications modules Configuration and parameterization Configuration limits when used on ASET 200S ET 200S6ES7 134-4FB50-0AB0 6ES7 134-4FB00-0AB06ES7 134-4LB00-0AB0 6ES7 134-4GB00-0AB0ET 200U ET 200X, ET 200U and ET 200BET 200B IP 262 closed-loop control mod- uleSiwarex M Configuration Siwa driver blockProperties and application features of the PROFIBUS-PA Connecting PROFIBUS-PA to AS 488/TMDelivery forms Teleperm MConnection of PROFIBUS-PA using DP/PA link Connection of PROFIBUS-PA using DP/PA couplerDriver block Description PROFIBUS-PATechnical data DP/PA link IM DP/PA coupler Only Technical Specifications Ordering DataIM 157 interface module for 6ES7 157-0AA81-0XA0 DP/PA link AS x88/TM-PA coupling soft 6DS5 130-8AA Ware, full licenseProcess I/Os CS-L2 bridge Bus communicationTransmission systems Bus communicationBus connector Electrical bus terminalOptical link module Transmission media Optical bus terminal OBT for ProfibusTPM 478 interface module ConfiguringLength ..... m Standard remote bus cable V45466-D21-B35In-house remote bus cable Remote bus cable with addi- tional armoringCS-L2 bridge CS-L2 bridgePerformance data Configuration Station addressesCS-L2 bridge PROFIBUS-TMCentral processing unit PS 405 load power supply, 10 a 6ES7 405-0KA01-0AA0 Connection to PROFIBUS-TM Connection to CS If 964-DP interface module 6ES7 964-2AA01-0AB0TPM 478 interface module Ordering Data Overview Introduction AG-AG coupling software Serial coupling Data couplings with other systemsData couplings Data couplings with other systems10/2 Coupling with systems from other vendorsAG-AG coupling software System couplings10/3 AG/AG coupling with Simatic S5/S7 central controllersPROFIBUS-AG/AG 10/4AG/AG coupling software 6DS5 124-1AA SDASerial coupling Direct couplings10/5 Transmission rate Max. cable length10/6 Appendix Software licenses AppendixSoftware 11/2Information and order option Internet and on CD-ROM11/3 11/4 Internet, TrainingInternet Training Courses in the Training Center Karlsruhe11/5 Order No. index

AS 488/TM specifications

The Siemens AS 488/TM is a cutting-edge solution in the realm of industrial automation and control. Designed specifically for high-performance applications, this device serves as a programmable logic controller (PLC) offering enhanced capabilities for process automation. The AS 488/TM stands out in the marketplace for its robust architecture, sophisticated features, and compatibility with various industrial protocols.

One of the pivotal features of the Siemens AS 488/TM is its integrated communication capabilities. It supports multiple communication protocols, such as Profibus, Profinet, and Ethernet/IP, facilitating seamless integration within diverse industrial environments. This flexibility ensures that the AS 488/TM can communicate with various devices, sensors, and actuators, providing a comprehensive solution for modern manufacturing needs.

In terms of processing power, the AS 488/TM is equipped with a high-performance CPU that can handle complex algorithms and data processing with ease. This enables the controller to manage intricate automation tasks, from simple control functions to complex multi-axis motion control. The device also comes with expandable I/O options, allowing users to tailor the system to meet specific application requirements. With a wide range of digital and analog inputs and outputs, the AS 488/TM ensures accurate monitoring and control of various processes.

Another notable characteristic of the AS 488/TM is its user-friendly programming interface. Siemens has developed the TIA Portal (Totally Integrated Automation Portal), a software platform that simplifies the programming and configuration of the PLC. This intuitive interface allows users to program the device using various programming languages, including Ladder Logic, Function Block Diagram, and Structured Text. The TIA Portal enhances productivity by providing simulation tools for testing and debugging applications before deployment.

The AS 488/TM also emphasizes safety and reliability. It complies with international safety standards and incorporates features that ensure safe operation in critical applications. Redundant power supplies and fail-safe mechanisms are integrated to minimize downtime and protect both personnel and equipment.

Moreover, the Siemens AS 488/TM is designed with future scalability in mind. As industries evolve and technology advances, the AS 488/TM can adapt to new requirements, ensuring a long service life and ongoing relevance in a rapidly changing landscape. Overall, the Siemens AS 488/TM is an impressive PLC that combines innovative features, robust technology, and flexible integration capabilities, making it an ideal choice for modern industrial automation systems.
Top Page Image Contents