Seagate FR-A7AY instruction manual Digital Output

Page 27

DIGITAL OUTPUT

5.2 Terminals

By setting the Pr. 313 to Pr. 319 values, output signals available with an inverter as standard can be output from the open collector terminals.

(1)Open collector output specifications: Permissible load 24V, 0.1ADC

(2)The circuit logic is the same as that of the inverter.

For details of changing the control logic, refer to the inverter manual (basic).

AMC

NC

SE

Y3

Y4

Y5

Y6

AM0

AM1

NC

SE

Y0

Y1

Y2

	Terminal Symbol	Terminal Name	Description
	Y0		Use Pr. 313 to assign functions.
	Y1		Use Pr. 314 to assign functions.
	Y2	Digital output	Use Pr. 315 to assign functions.
	Y3	Digital output	Use Pr. 316 to assign functions.
	Y3	terminals	Use Pr. 316 to assign functions.
	Y4	terminals	Use Pr. 317 to assign functions.
	Y4		Use Pr. 317 to assign functions.
	Y5		Use Pr. 318 to assign functions.
	Y6		Use Pr. 319 to assign functions.
	SE	Common	This is a common terminal (for sink and
	SE	terminal	source).
		terminal	source).
	AM0
	AM1	Used for analog output function. (Refer to page 11)
	AMC
	NC (empty)	Do not use.

22

Image 27

Contents FR-A7AY Safety Instructions This section is specifically about Safety mattersInjury Prevention  Contents  Digital Output PRE-OPERATION Instructions Unpacking and Product ConfirmationPacking confirmation Terminal layout PartsFront view Rear viewOutput signals SpecificationsMemo Pre-Installation Instructions Installation and WiringRemove the inverter front cover Installation ProcedureTightening Torque Cable Size Wiring30K or less 37K or more Name Setting Range Minimum Initial Refer to Number Parameter ListValue Parameter List Extension Analog Output Wiring ExampleInternal Block Diagram Terminals Terminal Symbol Terminal Name DescriptionExtension Analog Output Function Parameter List Parameter Name Setting Range Minimum Initial NumberSetting Adjustment ProcedureStart Calibration of meterExtension Analog Output Types of Monitor Increments Full-Scale Value Output signal settingWhen Pr = 0 When Pr = 10 Analog signal adjustment Pr , Pr , Pr , PrInstructions Digital Output Digital Output Digital Output Function Parameter List Name Initial Value Setting RangeFunction Output Signal ListSetting Function SettingRO2 Print Date Manual Number Revision Revisions