Adjustment Procedure, Setting | Seagate FR-A7AY manual

EXTENSION ANALOG OUTPUT

4.5 Adjustment Procedure

4.5.1Setting of analog output signal voltage/current switchover (Pr. 309)

Use Pr. 309 Analog output signal voltage/current switchover to select whether to output the same signal or different signals from terminal AM0 (voltage output) and terminal AM1(current output).

Pr. 309				Parameters for Setting	Parameters
Pr. 309	Description	Terminal			for
Setting	Description	Terminal			for
					Adjustment
0	Same select signals are output	AM0	Pr. 306	: Select the output signal.
(initial	from the voltage output terminal	AM1	Pr. 307	: Output signal value for zero analog output	Pr. 323
value)	(AM0) and current output	AM1	Pr. 308	: Output signal value for maximum analog output	Pr. 323
value)	terminal (AM1). The signal set in		Pr. 308	: Output signal value for maximum analog output	Pr. 324
10	Pr. 306 Analog output signal	AM0	Pr. 306	: Select the output signal.	C1 (Pr. 901)
10	selection is made valid. (The	AM1	Pr. 307	: Analog output value for zero output signal
	setting of Pr. 310 is made invalid.)	AM1	Pr. 308	: Analog output value for maximum output signal
	setting of Pr. 310 is made invalid.)		Pr. 308	: Analog output value for maximum output signal
		AM0	Pr. 310	: Select the output signal.	Pr. 323
			Pr. 311	: Output signal value for zero analog output	Pr. 323
			Pr. 311	: Output signal value for zero analog output	C0 (Pr. 900)
1			Pr. 312	: Output signal value for maximum analog output	C0 (Pr. 900)
1	Different select signals are	AM1	Pr. 306	: Select the output signal.	Pr. 324
			Pr. 306	: Select the output signal.
			Pr. 307	: Output signal value for zero analog output
			Pr. 307	: Output signal value for zero analog output	C1 (Pr. 901)
	output from voltage output		Pr. 308	: Output signal value for maximum analog output	C1 (Pr. 901)
	terminal (AM0) and current	AM0	Pr. 310	: Select the output signal.	Pr. 323
	output terminal (AM1).		Pr. 311	: Analog output value for zero output signal	Pr. 323
	output terminal (AM1).		Pr. 311	: Analog output value for zero output signal	C0 (Pr. 900)
11			Pr. 312	: Analog output value for maximum output signal	C0 (Pr. 900)
11		AM1	Pr. 306	: Select the output signal.	Pr. 324
			Pr. 306	: Select the output signal.
			Pr. 307	: Analog output value for zero output signal
			Pr. 307	: Analog output value for zero output signal	C1 (Pr. 901)
			Pr. 308	: Analog output value for maximum output signal	C1 (Pr. 901)

REMARKS

Analog output means voltage (0 to 10 V) and current (0 to 20mA) output from terminal AM0 and AM1, and output signal means the monitor signal (refer to page 18) set in Pr. 306 and Pr. 310.