2. Injury Prevention
CAUTION
•Apply only the voltage specified in the instruction manual to each terminal. Otherwise, burst, damage, etc. may occur.
•Ensure that the cables are connected to the correct terminals. Otherwise, burst, damage, etc. may occur.
•Always make sure that polarity is correct to prevent damage, etc. Otherwise, burst, damage may occur.
•While power is on or for some time after
3. Additional Instructions
Also note the following points to prevent an accidental failure, injury, electric shock, etc.
1) Transportation and mounting
CAUTION
•Do not install or operate the
•Do not stand or rest heavy objects on the product.
•Check that the mounting orientation is correct.
•Prevent other conductive bodies such as screws and metal fragments or other flammable substance such as oil from entering the inverter.
2) Trial run
CAUTION
•Before starting operation, confirm and adjust the parameters. A failure to do so may cause some machines to make unexpected motions.
3) Usage
WARNING
•Do not modify the equipment.
•Do not perform parts removal which is not instructed in this manual. Doing so may lead to fault or damage of the inverter.
CAUTION
•When parameter clear or all parameter clear is performed, reset the required parameters before starting operations. Each parameter returns to the initial value.
•For prevention of damage due to static electricity, touch nearby metal before touching this product to eliminate static electricity from your body.
4) Maintenance, inspection and parts replacement
CAUTION
•Do not test the equipment with a megger (measure insulation resistance).
5) Disposal
CAUTION
•Treat as industrial waste.
6) General instruction
All illustrations given in this manual may have been drawn with covers or safety guards removed to provide