Seagate FR-A7AY instruction manual  Contents 

Page 4

 CONTENTS 


1 PRE-OPERATION INSTRUCTIONS			1
1.1	Unpacking and Product Confirmation		1
1.1.1		Packing confirmation	1
1.1.2		Parts	2
1.1.3		Specifications	3
2 INSTALLATION AND WIRING			5
2.1	Pre-Installation Instructions		5
2.2	Installation Procedure		6
2.3	Wiring		7
3 PARAMETER LIST			9
4 EXTENSION ANALOG OUTPUT			11
4.1	Wiring Example		11
4.2	Internal Block Diagram		12
4.3	Terminals		13
4.4	Extension Analog Output Function Parameter List		14
4.5	Adjustment Procedure		15
4.5.1 Setting of analog output signal voltage/current switchover (Pr. 309)			15
4.5.2		Calibration of meter	16
4.5.3		Output signal setting	18
4.5.4 Analog signal adjustment [Pr. 307, Pr. 308, Pr. 311, Pr. 312]			19
4.6	Instructions		20

I

Image 4

Contents FR-A7AY This section is specifically about Safety matters Safety InstructionsInjury Prevention  Contents  Digital Output Unpacking and Product Confirmation PRE-OPERATION InstructionsPacking confirmation Parts Front viewRear view Terminal layoutSpecifications Output signalsMemo Installation and Wiring Pre-Installation InstructionsInstallation Procedure Remove the inverter front coverWiring Tightening Torque Cable Size30K or less 37K or more Parameter List Name Setting Range Minimum Initial Refer to NumberValue Parameter List Wiring Example Extension Analog OutputInternal Block Diagram Terminal Symbol Terminal Name Description TerminalsParameter Name Setting Range Minimum Initial Number Extension Analog Output Function Parameter ListAdjustment Procedure SettingCalibration of meter StartExtension Analog Output Output signal setting Types of Monitor Increments Full-Scale ValueAnalog signal adjustment Pr , Pr , Pr , Pr When Pr = 0 When Pr = 10Instructions Digital Output Digital Output Name Initial Value Setting Range Digital Output Function Parameter ListOutput Signal List SettingFunction Setting FunctionRO2 Revisions Print Date Manual Number Revision