4.2 How to Use the Crimping Tool, Pin Extractor
A special crimping tool is necessary for connection of wires to the contact pins of the 38P connector. The pin extractor removes the contact pin from the connector body. This paragraph describes how to crimp and extract the contact pin.
Crimping Tool
Contact Pin
Pin Extractor
Figure 4-2a Crimping tool, contact pin, pin extractor
How to use the crimping tool
Figure 4-2b
How to use the pin extractor
If a contact pin is inserted into an incorrect hole on the con- nector body, remove it with the pin extractor.
1.Push the pin extractor into the pin hole from the side opposite to the pin inserting side.
2.Push in the head of the pin extractor. The retaining spring comes free and the contact pin can be removed.
Figure 4-2c
13