Fabricating cable 54-038-000-601/SC (CN-B2, CN-B3, CN-B4)
Figure 4-14 Fabricating cable 54-038-000-601/SC
Assembling 38P connector
1.Bundle the unused wires outside the connector case.
2.Fix the cover 1, taking heed of the cable outgoing direction.
3.Dress the wires and fix the cover 2 and 3. Use a fragment of cable sheath to secure the wires at the connector clamp.
4.Shorten unused wires appropriately and treat their ends with vinyl tape to prevent short circuit.
Figure 4-15 Assembling 38P connector
Positioning guide pins
Guide pins of the connector identify the mating receptacle. Position them as shown below. Table
19