ON 1
2 3 4 5 6 7 8
Talker check (only for NMEA signal)
| S4 |
|
|
Talker is checked. | OFF |
|
|
Talker is not checked. | ON |
Talker of GP, SD, VD, etc. is checked.
Depth (Echo sounder, Color Video Sounder, etc.)
Input Device | S5 |
|
|
Echo Sounder * | OFF |
|
|
CIF or NMEA line | ON |
|
|
Depth data is selected with S5. |
|
*: Use this position for white line pulse when the depth data is taken from an echo sounder. However late model FURUNO echo sounders do not output white line pulse. Normally set to ON.
Interface unit (10P0047) adjustment
If the E/S picture on the screen does not have the desired coloration, perform the adjustment as follows with the preset potentiometers on the I/O board in the interface unit.
R27
Interface board
(10P0047)
R36
R55
S01
Setting for DIP switch
R56
S02
S01:
S02:
The FNZ marker is plotted on the echo sounder picture with this switch turned on when FNZ marker signal is fed to External Interface. Factory setting is the “ON” position.
Selects the signal mode (AC or DC) according to the combined echo sounder connected. Factory setting is the “AC” position.
39