Connections for ES picture and FNZ markers
To provide echo sounder picture and FNZ markers, connect echo sounder to J203 and net sonde to J202. The signals applied to J202 and J203 are
J202: Net sonde signal and trigger signal (keying pulse of echo sounder). A white line signal from an echo sounder may be additionally applied as described on the next page if the digital depth data is not available on J204.
J203: Echo signal and keying pulse from an echo sounder.
Connection 1: Displaying echo sounder picture
E/S
J203
(E/S)
INTERFACE
UNIT
Connection 2: Displaying echo sounder picture and FNZ markers by one echo sounder
FNZ JOINT BOX
SONDE 1 (FNZ)
J701
J202 (SONDE)
SONDE (FNZ) 2
SONDE (FNZ) 3
J705
J203 (E/S)
INTERFACE
UNIT
E/S |
| |
|
This method is used when the net sonde is installed and both echo sounder and net sonde signals are taken from the same echo sounder. The net sonde signal is applied to both J202 and J203.
Connection 3: Displaying echo sounder picture and FNZ markers by separate echo sounders
FNZ JOINT BOX
SONDE 1 (FNZ)
SONDE (FNZ) 2
J701
J202 (SONDE)
J203 (E/S)
SONDE (FNZ) 3
J705
INTERFACE
UNIT
E/S |
| |
|
E/S
26