Furuno CSH-23F, CSH-24F manual Fabricating Cable, Assembling Connectors

4.4Fabricating Cable, Assembling Connectors

Fabricating cable 00-8016-038-313-761HV (CN-A1, CN-A5 and J201)

L

Shield

Vinyl sheath

45Anticorrosive

40sheath

L = 250 (CN-A1) for Display Unit 320 (CN-A5) for Display Unit 170 (J201) for Interface Unit

Armor	L = 470	(CN-A1) for Processor Unit
	440	(CN-A5) for Processor Unit

Core

Insulating tape

Expose cores, and then wind shield around the armor.

Figure 4-4 Fabrication cable 00-8016-038-313-761HV

Assembling the 38P connector

Shorten the unused wires appropriately and their ends with vinyl tape to prevent short circuit.

Guide Pin A Guide Pin B

	Position No.
Insulate unused wires	Guide Pin A	Guide Pin B
with vinyl tape.
	(Large)	(Small)

Figure 4-5 How to assemble the 38P connector

Positioning guide pins

Guide pins of the connector identify the mating receptacle. Position them as shown below. Table 4-1 Guide pins and connectors CN-A1,CN-A5, J201

Connector	CN-A1	CN-A5	J201	Positioning Tool
Guide Pin
Guide Pin A (Large)	1	5	1
				Type: 10-910-0179-0
Guide Pin B (Small)	1	1	1

15