Furuno RP-250 manual Table of Contents

TABLE OF CONTENTS

FOREWORD		iv
1 OPERATIONAL OVERVIEW		1
1.1	General	1
1.2	Controls	2
1.3	Choosing Display Mode	3
1.4	Choosing Presentation Mode	4
1.5	Charts	5
	1.5.1 Displaying a chart	5
	1.5.2 Chart, cursor position
	correction	5
1.6	Setting up the Video Plotter Display...	6
	1.6.1 Hiding/Showing graphics	6
	1.6.2 Hiding/Showing nav data	7
2 TRACK		9

2.1Stopping Plotting of Own Ship's

Track 9

2.2Stopping Plotting of Other Ship’s

Track		9
2.3	Track Plotting Interval	10
	2.3.1 Choosing track plotting
	interval	10
	2.3.2 Finding track memory used ....	10
2.4	Smoothing	11
2.5	Erasing Track	11
2.6	Own Ship Track Color	12
2.7	Other Ship Track Color	12
3 MARKS, LINES		13
3.1	Choosing Method of Entry	13
3.2	Entering Marks/Lines	13
	3.2.1 Entering marks/lines at cursor
	or own ship position	13
	3.2.2 Entering marks at desired
	position	14
	3.2.3 Line change feature	14
3.3	Mark/Line Color	15
3.4	Erasing Marks/Lines	15
	3.4.1 Erasing individual marks	15
	3.4.2 Erasing all marks and all lines 15
	3.4.3 Erasing line segments	15
3.5	Finding Mark/Line Memory Used	16

4 WAYPOINTS, NAVIGATION LINES ...17

4.1	Entering Waypoints	17
	4.1.1 Entering waypoints at cursor
	position	17
	4.1.2 Entering waypoints at specific
	position	17
	4.1.3 Entering waypoints at own ship
	position	18
4.2	The Waypoint List	18
4.3	Displaying Waypoints	19
	4.3.1 Displaying waypoints	19
	4.3.2 Displaying waypoints from a
	navigator	19
4.4	Deleting Waypoints	20
	4.4.1 Deleting individual waypoints . 20
	4.4.2 Deleting all waypoints	20
4.5	Navigation Lines	20
	4.5.1 Entering new navigation line...	20
	4.5.2 Adding waypoints to navigation
	lines	21
	4.5.3 Removing waypoints from
	navigation lines	21
	4.5.4 Nav line list	21
	4.5.5 Deleting individual navigation
	lines	21
	4.5.6 Deleting all navigation lines ....	21
	4.5.7 Setting up navigation lines	22
	4.5.8 Displaying navigation lines	24
5 RECORDING, REPLAYING DATA		25
5.1	Formatting Memory Cards	25
5.2	Recording Data	26
5.3	Replaying Data	26
6 OTHER PLOTTER FUNCTIONS		27
6.1	Initial Settings	27

6.2Longitude Error Table (on 96 nm

range scale)		28
7 AIS OPERATION		31
7.1	Turning AIS Feature On/Off	31
7.2	Turning AIS Display On/Off	32
7.3	Activating Targets	32

ii