Furuno RP-250 manual FR-2105 Test, Test results

9. INSTALLATION OF VIDEO PLOTTER KIT

b)Insert supplied floppy disk in the PC, execute the “upe.bat” file. The PC displays “TARGET POWER ON.”

c)Turn on the display unit to load the program. The PC displays “Finish Version up.ted” when the loading is completed.

d)Disconnect the PC connection cable.

e)While pressing and holding down the [HL OFF] key, press the [RADAR MENU] key five times.

f)Press [RADAR MENU], [0], [0], [0], [2], [0], [0], [0], [0].

g)Press the [ENTER] key five times.

h)Turn the power off and on. “Initializing” appears on the display for about 90 seconds.

i)Confirm RP program no. by pressing the [RADAR MENU], [0], [0], [0], [3] and [ENTER].

**: Program number

*1: 03591870** for C-MAP specification

	FR-2105 TEST
PROGRAM NO		ROM	RAM	CRAM	DISPSW
MAIN	03591840**	OK	OK		1234
ARP	18590381**	OK	OK	OK	0000
DSP	18590391**	OK	OK	OK
RP-1	03591860**, *1	OK	OK	OK	00
RP-2	03591880**	OK		OK	00
	DRAM	OK	OK
	RP BOARD BAT	OK		SIO	- -
	RP CARD 1	OK	CARD 2		OK
	CARD 1 BAT	OK	CARD 2 BAT		OK
ANTENNA SPEED		23.8 RPM
TRIG FREQ		143.2 Hz
MAG CURRENT		11.1 V
R. MONITOR		1.8 V
TUNE IND		0.8 V
	1 2 3	002		2 5 1
				0 0 8

To quit press [STBY/TX] key twice.

Test results

16.Retract the stay to close the display unit.

17.Push in the monitor until you hear a “click.”

18.Refasten bolts removed at step 2.

19.Refasten the right and left arm covers.

53