1. OPERATIONAL OVERVIEW
5. Press any menu key to close the menu.
Note 1: LAND DENSITY fills (ON) or hollows (OFF) land on an electronic chart. Land will be hollow when wrong card or wrong scale is used, regardless of LAND DENSITY setting.
Note 2: OWN SHIP PLOT functions as follows:
OFF: Own track is neither plotted nor recorded.
SEPARATE: Own track is neither plotted nor recorded when RECORD OWN SHIP PLOT of OWN SHIP, TARGET PLOT menu is OFF own ship plotting.
CONTINUE: Own track is plotted but not recorded when RECORD OWN SHIP PLOT of OWN SHIP, TARGET PLOT menu is OFF own ship plotting.
1.6.2Hiding/Showing nav data
You may choose what navigation data to display on the video plotter display as follows:
1.Press the [NAV MENU] and [1] keys to display the NAV INFORMATION 1 menu.
[NAV INFORMATION(1)] 1 [VIDEO PLOTTER(1)]
2 SELECT NAVAID GPS+LC/DEAD RECKONING /AIS
3 OWN SHIP POSN OFF/ L/L
4POSN 00°00.000 N/S
000°00.000 E/W
5 +CURSOR DATA OFF/L/L
6 WPT DATA OFF/REL/TRUE
7 [NAV LINE]
8 [WAY POINT]
9 WIND DATA
ON/OFF
0 [NAV INFORMATION(2)]
NAV INFORMATION 1 menu
2.Press appropriate numeric key to choose both item and option. Press the [ENTER] key to register selection.
Note 1: Item 2 chooses source of position data as below. GPS+LC: Own ship position data fed from GPS or Loran C navigator.
DEAD RECKONING: Position data entered at item 4 (POSN) is used as starting point for dead reckoning.
AIS: Own ship position data fed from AIS transponder.
Note 2: When dead reckoning navigation is used on the IMO type radar (G mode), the AIS feature is automatically turned off, no AIS symbols are displayed, and the menu item “AIS OFF/ON” is not shown on the AIS1 menu.
7