Furuno RP-250 manual Bwr

Page 29

4. WAYPOINTS, NAV LINE

Note: Waypoints are automatically switched when own ship is either 1/2 of the arrival alarm range or 0.5 nm from next waypoint, whichever figure is larger. For example, the arrival alarm range is 2 miles. Since 1/2 of the arrival alarm range is 1 mile and it is larger than 0.5 miles, the waypoint will be switched when your ship is 1 mile from a next waypoint.

12.Press the [NAV MENU] key to close the menu.

Note: To display the nav line by using the external data, IEC 61162-1 data sentence BWR, BWC, RMB, or WPL is required. The order of priority is BWR>BWC>RMB>WPL. In case of simultaneous input BWR has priority. To use BWR, BWC, RMB for waypoint sentences, set USED WPL# to NAV LINE in the NAV INFORMATION 3 menu. That is the normal usage. To use the WPL for destination waypoint, set USED WPL# to WPT in the NAV INFORMATION 3 menu. This should only be used when connected to a navigator which outputs only the WPL data sentence. The data sentence and displayed data are as follows:

BWR: Range and bearing to waypoint (great circle)

BWC: range and bearing to waypoint

RMB: Generic navigation data (range and bearing to waypoint, latitude and longitude position of waypoint, course, etc.

WPL: Latitude and longitude of waypoint

Input waypoint

 

 

 

Display Contents

 

 

sentence

 

Display

 

Data Display

 

Radar

Radar/Video

Radar Display

Radar/Video Plotter

 

Display

Plotter Display

 

 

Display

BWR,

WPT No.

WPT

Rng to WPT

WPT

BWC,

Nav line

Nav line

Bearing to WPT

Rng to WPT

RMB, or

 

 

Nav line width

 

(Data not

Bearing to WPT

WPL

 

 

Arrival alarm

 

displayed in

 

 

 

 

 

 

range

 

case of

 

 

 

 

 

 

 

 

sentence WPL)

 

 

When data of

Above data is

Above data is

The above data is

The above data is

above

erased and

erased and

updated and

updated and

sentences

replaced with

replaced with

displayed.

displayed.

changes

latest data.

latest data.

(Data not displayed

 

 

(destination

 

 

 

 

in case of sentence

 

 

waypoint

 

 

 

 

WPL)

 

 

changed)

 

 

 

 

 

 

 

 

 

 

 

 

 

No input of

30 seconds

30 seconds later

30 seconds later

30 seconds later

above

later the

the above data is

asterisks (*) shown

asterisks (*) shown

sentences

above data is

erased.

for above data.

for above data.

(waypoint

erased.

 

 

(Data not displayed

 

 

cancelled)

 

 

 

 

in case of sentence

 

 

 

 

 

 

 

WPL)

 

 

 

 

 

 

 

 

 

 

 

23

Image 29
Contents Video Plotter 00080933204 Safety Instructions Table of Contents IN-1 IiiSP-1 Word to the Owner of the RP-250 FeaturesForeword General Operational OverviewFR-2105 series radar display unit ControlsVideo plotter controls AIS controlsVideo plotter display Choosing Display ModeAbout the radar/video plotter display Choosing Presentation ModeItem and default setting Default selected at above Displaying a chart ChartsChart, cursor position correction Chart position correctionCanceling chart position correction Setting up the Video Plotter DisplayHiding/Showing graphics Cursor position correctionNAV Information 1 menu Hiding/Showing nav dataNAV Information 3 menu For manual input of position item 4, do the followingNAV Information 2 menu Stopping Plotting of Own Ships Track TrackStopping Plotting of Other Ship’s Track OWN SHIP, Target Plot menuChoosing track plotting interval Track Plotting IntervalFinding track memory used Memory in USE displayPlotter Erase menu SmoothingErasing Track Target Plot Color menu Own Ship Track ColorOther Ship Track Color Choosing Method of Entry MARKS, LinesEntering Marks/Lines Entering marks/lines at cursor or own ship positionEntering marks at desired position Line change featureErasing Marks/Lines Mark/Line ColorErasing individual marks Erasing all marks and all linesFinding Mark/Line Memory Used Entering Waypoints WAYPOINTS, Navigation LinesEntering waypoints at cursor position Entering waypoints at specific positionWPT List Waypoint ListEntering waypoints at own ship position Displaying waypoints Displaying WaypointsDisplaying waypoints from a navigator Waypoint menuNavigation Lines Deleting WaypointsDeleting individual waypoints Deleting all waypointsRemoving waypoints from navigation lines Adding waypoints to navigation linesNav line list Deleting individual navigation linesNAV Line menu Setting up navigation linesBWR Displaying navigation lines Record menu RECORDING, Replaying DataFormatting Memory Cards Replay Card 1 menu Recording DataReplaying Data Other Plotter Functions Initial SettingsVideo PLOTTER, Initial Setting menu Distance error in direction of longitude due to latitude Longitude Error Table on 96 nm range scale2256 4444 6496 8350 9950 1248 2202 2786 2980 This page intentionally left blank AIS symbols Turning AIS Feature On/OffAIS Operation AIS1 menuActivated target Turning AIS Display On/OffActivating Targets Sleeping an AIS target Sleeping TargetsSleeping all AIS targets Sleeping targetActivating all sleeping AIS targets Displaying Target DataBasic target data Activated target selected for data displayExtended data display Extended target dataMessages Lost TargetDisplaying messages manually Lost targetAutomatically displaying messages Safety related messageTurning history display on/off History DisplaySample history displays AIS2 menuChoosing history display attributes AIS Symbol ColorLost Target Range Automatic Target ActivationROT display ROT Display SettingAIS3 menu Combining AIS with Arpa fusionMessage Meaning AIS System MessagesAIS system messages AIS Alarm Message Replacing the Battery on the RP Board MaintenanceReplacing the Battery in the Memory Card Battery for Battery Type Code NumberSystem Error Tabletop/Console Type Installation of Video Plotter KITNecessary parts Name Type Qty Code No RemarksDisplay unit Control headDisplay unit, inside view Setting catch to hole in stayFastening the M-card assy. to the right arm cover Stay fixedDisplay pedestal, top view Display pedestal, front viewTD-B PC connectionTest results FR-2105 TestAIS Data Separate Type Control Head Fasten with M4 x 8 screw Fasten with M3 x 8 screws 2 pcs Installation of Video Plotter KIT Digital Interface IEC AppendixInput sentences RP Board, J4 Data receptionLoad requirements as listener Schematic diagramCOG, SOG, HDG, ROT Interface FunctionMain Board Modification IEC 60936-1 related items SOG selected on menu Conditions Which Display the Alarm for WTSTW selected on menu Video plotter Menu TreeEnter WPT, NAV Line OWN SHIP, Target Plot AIS RP-250 Specifications of Video PlotterIN-1 Index