Furuno RP-250 manual Fasten with M4 x 8 screw Fasten with M3 x 8 screws 2 pcs

9.INSTALLATION OF VIDEO PLOTTER KIT

1.Follow steps 1 thru 4 in the previous paragraph to open the display unit.

2.Remove M-card lid, case and case cover from M-card assy. The case and case cover may be discarded.

3.Fasten the M-card assy. with one M4 x 8 screw as below.

Fasten with

M4 x 8 screw.

Fasten with M3 x 8 screws (2 pcs.)

Display unit, inside view

4.Fix the M-card assy. to front panel with two M3 x 8 screws.

5.Set the M-card lid to the hole in the front panel and fix with two M2.6 x 5 screws.

	Ground Wire
	Pan Head
Pan Head Screw A	Screw B
	M4 x 8
M3 x 8
Toothed Washer
M3

M-card Assy.

1

2 3 4 5 6

7

8

8 GND

1 TX-H V

Pan Head Screw A

M2.6 x 5, 2 pcs.

PULL FORWARD	Pan Head Screw B
	M3 x 8, 2 pcs.

M-card Lid

Display pedestal, front view

56