Graco A-25 important safety instructions DataTrak Controls and Indicators, Run Mode, Setup Mode

DataTrak Controls and Indicators

DataTrak Controls and Indicators

The DataTrak on the Reactor A-25 sprayers do not have runaway protection. For setup and operation instructions see DataTrak Operation, page 33.

Key for FIG. 4

AB	Combined Lower Displacement (user settable)
AC	Flow Rate Units (user settable to	/min, gpm [US], gpm
	[Imperial], oz/min [US], oz/min [Imperial], l/min, or cc/min)
AD	LED (fault indicator when lit)
AE	Display
PF	Prime/Flush Key (Enables Prime/Flush mode. While in
	Prime/Flush mode, the batch totalizer [BT] will not count.)
	LED will flash while in Prime/Flush mode.

RK Reset Key (Resets faults. Press and hold for 3 seconds to clear the batch totalizer.) Push to toggle between flow rate and cycle rate.

CF Cycle/Flow Rate

BT Batch Totalizer

GT Grand Totalizer

RT Runaway Toggle (leave disabled)

	GT
AE, see details at right	Run Mode
RK	PF

ti8622b

CF BT

AD	TI11883a	Setup Mode	RT
	AC
	AB
	RK			PF
			ti17741a

FIG. 4. DataTrak Controls and Indicators

32 3A1569B