3.Press CUE ASSIGN for the second input source.
illustration of CUE ASSIGN with arrow to CH 2
4.Set the input source selector to the input source you want to mon- itor.
illustration
5.Start playback of the input source you want to play next through your sound system.
6.If necessary:
•Adjust CUE LEVEL to a comfort- able listening level.
•Adjust the second input source volume slide control to the cor- rect preset position.
7.Set the input device to the desired section of music, then stop or pause the input device.
Switching to the Second Input Source
1.Start playback of the second input source.
2.When you are ready to play its sound through your sound sys-
16
tem, slide CROSS FADER from A to B.
illustration of CROSS FADER w/arrow from A to B
Slide CROSS FADER:
•To the left to fade in the channel selected by ASSIGN A and fade out the channel selected by AS-
SIGN B.
•To the right to fade in the chan- nel selected by ASSIGN B and fade out the channel selected by ASSIGN A.
•To the center to equally mix the two.
Notes on Mixing
•If you set CROSS FADER to A to play the channel selected by AS- SIGN A, then you must set CUE ASSIGN to CH 1 to monitor CH 1, to CH 2 to monitor CH 2, to CH 3 to monitor CH 3, to CH 4 to monitor CH 4, and to MIC to monitor DJ MIC. The same applies when you set CROSS FADER to B.
•To mix any two inputs selected by the ASSIGN switches, set each ASSIGN switch to the desired channel. Then use CROSS FADER to mix the two.