Optimus SSM-1250 Connecting Power, Connecting a Lamp, Illustration of lamp being connected

32-3009.fm Page 8 Tuesday, August 10, 1999 8:31 AM

3.Connect a microphone (not sup- plied) to the mixer.

•If the microphone has an XLR plug, connect it to MIC on the top left corner of the front panel.

illustration of microphone plug being inserted into jack

Do not show entire microphone

CONNECTING POWER

Connect the power cord to a standard AC outlet.

Note: The power cord has a polarized plug that fits only one way into a stan- dard AC outlet. If the plug does not fit, turn it clockwise so it fits properly. Do not force the plug into the AC outlet or you could damage the outlet or the plug.

•If the microphone has a 1/4-inch plug, connect it to MIC on the low- er right corner of the back panel.

illustration of microphone plug being inserted into jack

Do not show entire microphone

Note: We recommend you do not connect an XLR and a 1/4-inch plug microphone to the mixer at the same time.

CONNECTING A LAMP

The mixer has a 12V BNC lamp sock- et for connecting a 12V DC/3W lamp (RSU Cat. No. 11443363) so you can see the control panel in dark or low- light conditions.

illustration of lamp being connected

Caution: Use only a 12V DC/3W lamp.

8