•Do not slide CROSS FADER to the center if you want to monitor one channel while the other is playing. Otherwise, the sound from the channel you monitor will also be heard through your sound system. Instead, slide CROSS FADER to the channel you are not monitor- ing. For example, to monitor chan- nel 1 (selected by ASSIGN A) while channel 2 (selected by AS- SIGN B) is playing, slide CROSS FADER to B.
•Use CUE/PGM to listen to the input controlled by the CUE ASSIGN switch and what is playing on the currently selected output device. When CUE/PGM is set to CUE, you only hear the channel selected by the CUE ASSIGN switches. When CUE/PGM is set to PGM, you only hear what is playing on the cur- rently selected output device. Ro- tate CUE/PGM to listen to both inputs at the same time.
USING TALKOVER
illustration of switch set to TALKOVER
When you are not using the micro- phone, leave OFF/ON/TALKOVER set to OFF. The microphone’s input is turned off and all other audio input sources are unaffected.
If you want to use a microphone:
•Set OFF/ON/TALKOVER to ON to mix the microphone equally with the other audio input sources.
•Set OFF/ON/TALKOVER to TALK- OVER to mix the microphone at a higher level than the other audio input sources.
Your voice sounds clearly through the microphone, but all the other audio input sources sound at a lower level. (This is useful for pag- ing.)
17